Washer has blinked FH code. Push cancel button and it restarts. Now it blinks the time left and is stuck on that part of cycle. Pushing cancel button or unplugging does not work. The darn thing is also locked.
Appliantology Parts Search Box
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Whirlpool Duet HT GHW9300PW4 error code FH, blinks time left
Started by Ralph48, Jan 07 2012 12:44 PM
Whirlpool Front Load Washer
4 replies to this topic
Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
#2
RegUS_PatOff
-
- Grand Master Funk
-
- 30,242 posts
Sensei
- Location: USA
- Flavorite Brew:Chief NTSC Black & White
Posted 07 January 2012 - 01:51 PM
To unlock the controls
Select and hold END OF CYCLE SIGNAL for 3 seconds until the CONTROL LOCKED Status light turns off.
FH NO WATER DETECTED ENTERING MACHINE OR PRESSURE SWITCH TRIP NOT DETECTED
Select and hold END OF CYCLE SIGNAL for 3 seconds until the CONTROL LOCKED Status light turns off.
FH NO WATER DETECTED ENTERING MACHINE OR PRESSURE SWITCH TRIP NOT DETECTED
- Samurai Appliance Repair Man and phydeauxe64 like this
.
one of my video productions: “Easter Seals: Walk With Me”
every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962
RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw
one of my video productions: “Easter Seals: Walk With Me”
every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962
RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw
#3
phydeauxe64
-
- Chief Master Appliantologist
-
- 81 posts
Yamabushi
- Flavorite Brew:"Double D" Turbo Coffee
Posted 08 January 2012 - 03:36 PM
Yes, make sure both hot and cold water are on. If so turn water off and check the screens on the fill valve for debris,if clogged remove the screens with a small screwdriver then clean em out put em back in and try running the washer again.
#4
delawaredrew
-
- Sublime Master of Appliantology
-
- 183 posts
Sōhei
Posted 15 January 2012 - 03:20 AM
SO if your water lines are flowing; You could be looking at a bad flowmeter (some of these had them) if it is very shortly after starting machine. Or a clogged presure hose or faulty pressure switch. More exotic ideas include the wiring between flow meter and presure switch (black and/or blue wires). I chased this error for 4 trips once before changing the harnesses involved and fixing it.
- Samurai Appliance Repair Man likes this
#5
Samurai Appliance Repair Man
-
- Fermented Grand Master
-
- 24,279 posts
Your Sometimes-Lucid Host
- Location: USA
- Flavorite Brew:Kirin Ichiban
Posted 15 January 2012 - 05:38 AM
Right on, Brother Delaware. Ralph, more info on the FH error code here ==> http://fixitnow.com/...fh-fault-codes/
FAQs | Parts | Memberships | Consultations | Repair Videos | Newsletter | Beer Fund | Contact
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
Your Sometimes-Lucid Host:
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."
ApplianceGuru.com | AppliancePartsResource.com | Fixitnow.com
