Whirlpool Duet GHW9250ML2 Door Lock Engaged With Door Opendoor lock
Posted 15 January 2012 - 06:16 PM
Door lock is engaged but the door is open.
I tried pulling the manual release inside, tab comes down OK but no "click" sound and lock stays locked.
What to do please?
Posted 15 January 2012 - 08:06 PM
I took the old one out, and when I move the white bracket up and down, the door lock hook does not move.
Posted 18 January 2012 - 03:19 PM
Installed and the door now closes.
Ran the first load of wash and went back later when it was beeping.
Digital display was flashing 11 then F alternately.
Wife claims it's been doing this once in a while too.
Canceled and selected rinse/spin.
Is there a fix for this?
Posted 18 January 2012 - 04:36 PM
Check your wiring to the board.
Unplug and re-plug the wires.
If the error continues replace the CCU.
The problem may be with your door switch wires.
Posted 18 January 2012 - 08:21 PM
Will see how subsequent loads do when they are ready to be washed.
Posted 18 January 2012 - 11:34 PM
Do I have to mess with the connections for the small wires too?
Posted 20 January 2012 - 09:53 AM
Posted 16 February 2012 - 10:04 AM
Then, in order to get 3 loads done, had to take the top cover off and "monkey" with the connections on the control unit once for each of the three loads in order for them to complete.
I'll probably buy that contact grease from granger listed above.
Posted 01 March 2012 - 03:17 PM
Put 4 loads through it without a hitch. I even got the green cycle complete light all 4 times and buzzer (was hit & miss before)
I only put the grease on the larger plug connections; those were the ones I would disconnect/re-connect and get it to work. The smaller ones seemed harder to get off/more likely to break.
Posted 01 March 2012 - 05:42 PM
Need parts? Call our Parts Department now! 877-803-7957
Posted 01 March 2012 - 07:54 PM
Also tagged with one or more of these keywords: door lock
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users