Jump to content
LIMITED TIME OFFER: Use code 10YEARS10 to get 10% off your Appliantology membership. Click here for more ×
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    No upcoming events found

Whirlpool GU2300XTVQ Dishwasher, will not wash (pump not running) drains OK


mattmag

Recommended Posts

Hi there,

Need a service manual to perform diagnostics on this machine. It fills, will not wash, no noise from pump. Cancel/drain works fine.

Thanks--

-Matt

EDIT. OK it runs....*a little* sometime. Just tried it on "rinse only" cycle, pump ran about 2 seconds then shut off.......

Edited by mattmag
Link to comment
Share on other sites

  • Replies 2
  • Created
  • Last Reply

Top Posters In This Topic

  • mattmag

    2

  • RegUS_PatOff

    1

Top Posters In This Topic

Thanks much--- I'll run it through the diagnostics and see what happens. I'm a little concerned with the intermittent nature of this thing. I was hoping the pump was either a go or no-go, but I have found that it will run for a second or two at times, and others it won't start at all. I believe that would rule out a start capcitor?

Link to comment
Share on other sites


×
×
  • Create New...