Jump to content
Click here to check out our on-demand appliance repair training webinars.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Miele cook top KM342G


Sonic

Recommended Posts

Looking for a service manual. I am not familiar with the theory of operation of this model. Even the thermocouples hook up to the module according to the schematic.

Link to comment
Share on other sites

Right on! That's what I needed thanks. Given what I just read in the manual I think I have a bad electronic. The customer will get random clicking of the ignitors when three burners are in use.

Link to comment
Share on other sites

You're not sure where you heard this, but if the customer calls Miele and explains the problem to them, the just might have had some issues with this in the past - could be worth a call.

  • Like 1
Link to comment
Share on other sites

×
×
  • Create New...