Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

wiring diagram or s/m for frig. ffc25c8cw0


ddazzle007

Recommended Posts

looking for wiring diagram for chest freezer frigidair # ffc25c8cw0....

alarm wont shut off light , alarm light stays on

thanks in advance

dennis

Link to comment
Share on other sites

from Electronic Controled Freezer Service Manual 5995482584

TEMPERATURE ALARM

If the cabinet temperature rises to a level above 23ºF (-5ºC), a high temperature alarm will be activated.

The control panel will beep every five (5) seconds, the red alarm light will glow and the display will flash.

This will continue until the problem is determined, corrected and temperature once again drops to a level below 23ºF (-5ºC).

You may stop the beep by pressing the ALARM RESET button.

To also stop the display from flashing, press and hold the ALARM RESET button until the control panel beeps.

Temperature Alarm will reactivate itself upon reaching a safe temperature.

  • Like 1
Link to comment
Share on other sites

thanks for the info , i would still like to find a wiring diagram , im trying to advise a friend what to test over the phone and its hard to do from the parts diagrams ive looked at

thanks

Link to comment
Share on other sites

×
×
  • Create New...