Maytag, (sorry, no model#), have general question
Posted 24 February 2012 - 11:41 AM
During all the icing up of the coils, the metal areas around the coils began to get very rusty. My installer says this is no problem and that they all eventually get rusty. Is this a real issue? Should I ask that they replace the coil since it was there mistake in not putting in the correct damping system in the first place?
P.S. if it's absolutely necessary, I can enter in the model# when I get home tonight. I'm at work and I don't have access right now.
Posted 24 February 2012 - 05:16 PM
The model number will allow us ti visualize the unit and how YOUR unit is designef to operate.
You will most likely be asked more questions about the system and installation.
Posted 13 March 2012 - 07:28 PM
As to the steel end plates on the coil rusting....this is absolutely normal and occurs on all coils after a few months of operation.
Edited by Shootist, 13 March 2012 - 07:33 PM.
- kdog likes this
Posted 13 March 2012 - 09:40 PM
During the heating season, the coils began icing up .
Condensing unit should NOT be running when furnace is in Heating Mode
I can enter in the model# when I get home tonight.
Dang - you musta took the REALLY REALLY long way home
Need parts? Call our Parts Department now! 877-803-7957
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users