loungelizard Posted March 22, 2012 Share Posted March 22, 2012 Hi there, think I need to replace the bearing on an Asko 10505 washing machine. Need the tech manual to see if I can do it(also will help me in the future if something else goes wrong) Doomo arigato in advance Link to comment Share on other sites More sharing options...
Team Samurai Samurai Appliance Repair Man Posted March 22, 2012 Team Samurai Share Posted March 22, 2012 Added to the Downloads section just for you, budrow ==> Link to comment Share on other sites More sharing options...
loungelizard Posted March 22, 2012 Author Share Posted March 22, 2012 Bukka, that' s not really what I wanted. You wouldn't have a schematic diagram with parts listings? Thanks Link to comment Share on other sites More sharing options...
Team Samurai Samurai Appliance Repair Man Posted March 22, 2012 Team Samurai Share Posted March 22, 2012 Added to the download link above. Link to comment Share on other sites More sharing options...
loungelizard Posted March 26, 2012 Author Share Posted March 26, 2012 Thanks, changing the bearings wasn't as hard as I thought. Is it possible to change the bearings in the motor? Link to comment Share on other sites More sharing options...
Hank496 Posted December 28, 2013 Share Posted December 28, 2013 Sorry to resurrect this old post. I downloaded manual and it seems kind of sparse. No schematic, or explanation on disassembly of components, just introductory explanations of major components. I can't see how OP got info to change bearings from this document. Is there anything with more detail?ThanksHank Link to comment Share on other sites More sharing options...
Team Samurai Samurai Appliance Repair Man Posted December 30, 2013 Team Samurai Share Posted December 30, 2013 Schematic is part of the download bundle. It's there, I added it myself. Added to the download link above. Link to comment Share on other sites More sharing options...
danoam Posted June 19, 2014 Share Posted June 19, 2014 To my knowledge, there is no good instructions for replacing an Asko drum bearing. Be aware that if the inner drum needs to be replaced due to a loose spider or damage to the shaft, the part is no longer available. Also, performing this repair without the bearing installation tool and alignment tool for the drum, this job is a nightmare. Sent from my SCH-I545 using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts