Jump to content
Click here to check out our on-demand appliance repair training webinars.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Asko 10505 washer repair manual


loungelizard

Recommended Posts

loungelizard

Hi there, think I need to replace the bearing on an Asko 10505 washing machine. Need the tech manual to see if I can do it(also will help me in the future if something else goes wrong) Doomo arigato in advance

Link to comment
Share on other sites

  • Replies 7
  • Created
  • Last Reply

Top Posters In This Topic

  • Samurai Appliance Repair Man

    3

  • loungelizard

    3

  • danoam

    1

  • Hank496

    1

  • Team Samurai

Added to the Downloads section just for you, budrow ==> :dazzler:

Link to comment
Share on other sites

loungelizard

Bukka, that' s not really what I wanted. You wouldn't have a schematic diagram with parts listings? Thanks

Link to comment
Share on other sites

  • Team Samurai

Added to the download link above.

Link to comment
Share on other sites

loungelizard

Thanks, changing the bearings wasn't as hard as I thought. Is it possible to change the bearings in the motor?

Link to comment
Share on other sites

  • 1 year later...

Sorry to resurrect this old post. I downloaded manual and it seems kind of sparse. No schematic, or explanation on disassembly of components, just introductory explanations of major components. I can't see how OP got info to change bearings from this document. Is there anything with more detail?

Thanks

Hank

Link to comment
Share on other sites

  • Team Samurai

Schematic is part of the download bundle.  It's there, I added it myself.

 

 

Added to the download link above.

Link to comment
Share on other sites

  • 5 months later...

To my knowledge, there is no good instructions for replacing an Asko drum bearing. Be aware that if the inner drum needs to be replaced due to a loose spider or damage to the shaft, the part is no longer available. Also, performing this repair without the bearing installation tool and alignment tool for the drum, this job is a nightmare.

Sent from my SCH-I545 using Tapatalk

Link to comment
Share on other sites

×
×
  • Create New...