Kenmore washer Model # 110.92195110 motor won't operate
Posted 29 November 2005 - 07:01 PM
I've replaced the clutch because of noise-loud clicking during wash cycle. Replacing the clutch didn't help the noise and finally the motor actually quit so I removed it, rotating by hand produced a similar clicking sound so I replaced the motor. The new motor will not operate in any cycle. I get a click from one of the relays(?) but that is all.
Is there a reset switch or code to punch in using the various buttons that will allow the new motor to start?
I've recheck the wiring harness for loose connections also.
Thanks for anyone's help!
Posted 30 November 2005 - 07:43 AM
DIYers: Save time and money by learning the secrets of appliance repair... Click Here!
Posted 30 November 2005 - 04:52 PM
If either of the two boards are out, which I suspect, I guess my wife will get the new W/D combo for Christmas! I will get to hang the 25 lb new motor from my Christmas stocking and hope it doesn't fall and break a toe or two!!!
Thanks for you help- buck
Posted 10 January 2006 - 07:17 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users