Jump to content
LIMITED TIME OFFER: Use code 10YEARS10 to get 10% off your Appliantology membership. Click here for more ×
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

GE Spacemaker WSM2700HBWWW washer agitator not rotating during wash cycle, but does rotate (with spin tub} during spin cycle.


danellis

Recommended Posts

This is a stacked washer/dryer that Electrolux built for GE. On the waher, the agitator doesn't rotate during wash cycle, although motor and belts are rotating. Agitator does rotate (in concert with spin tub) just prior to rinse cycle and during spin cycle. All help will be greatly appreciated.

Link to comment
Share on other sites

  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • danellis

    2

  • kdog

    2

Top Posters In This Topic

I appreciate the reply, and have two questions for you.

(1) Are you saying that the GE stacked washer/drier (built by Electrolux) has the exact same parts as the Kenmore - Frigidaire washer that you referenced?

(2) Do you have any instructions for removing the agitator (so as to check its splined connection to the drive shaft that it is mounted on) of the machine that I'm working on?

Thanks again for your reply.

Link to comment
Share on other sites

Yes, the manual in the link above is applicable - remove cap to expose mounting bolt/stud Agitator-Cap-WH43X118-01260599.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...