6 replies to this topic

[rolandvz71]

Ok I found this on Craigslist for 40 bucks and my of school of hard knocks continues.....Figured 40 bucks to learn something new? The return is priceless!

I put water to it
I wire up electricity
I open up the door I get a BLUE light on the normal cycle then it turns off when I close the door
I press the start button and I get nothing.....I try all the cycles and still i get nothing...no lights, no sounds---- nothing
Tested door switch is GOOD

Is there any diagnosis /sequence of buttons I can uses to test out other components?

Thx!

Edited by rolandvz71, 04 April 2012 - 12:39 AM.

[RegUS_PatOff]

also has low 12v DC switching power supply
wiring diagram 154676603.pdf
link PM'd

[RegUS_PatOff]

parts manual
5995514824.pdf c.2008

[kdog]

The board on that machine is located behind the kickplate and has led's built into it to show fail codes - it"s a real nasty design - check the manual in the PotLuck Supper - http://appliantology...lux-dishwasher/

[rolandvz71]

thx for the doc! I will report findings in coming days....

[rolandvz71]

OK back w/a update.....it was good to have all the documents you guys gave me (a plug for future members)
This site is really amazing--- you get the help you need in a matter of minutes!

Well it was operator error on my part and probably the fella I bought this from also, because there is not a dang thing wrong with this dishwasher!

You must select your options w/the door OPEN then close the door and press START....I was doing the opposite! (manuals I did not have but they were provided by the fellas from appliantology.org so I was able to get a running start!)

So I ran a cycle and sure enough she fired right up!

for all the help!!!

[RegUS_PatOff]

see PDF page 5
To start, press START/CANCEL pad and close door.
EIDW6105GB1
Use & Care Guide
154671201b.pdf