Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Service manual request: Kitchenaid Ref. KSSC48QTS02 disp motor access


NCARepair

Recommended Posts

I have a faulty ice dispensor motor and believe on this model I have to remove the front freezer door panel to access the motor. Wanted a service manual to be sure.

Thanks

Link to comment
Share on other sites

  • Team Samurai

Download from PotLuck Supper to be available very soon,

Available now! :thumbsup:

  • Like 1
Link to comment
Share on other sites

Thanks for the quick response on the manual. However there is no motor access door on this. This has a user interface that is mounted behind the stainless steel front door panel above the dispenser.. Also from the wpl parts breakdown it appears the door handles are held in from screws behind the panel. No dispenser trim to remove as on traditional ice in door system. Sorry if i wasn't clearer.

Thanks

Link to comment
Share on other sites

In Door Ice systems all use this design, access panel is on the inside of the door on the bottom of the liner moulding - you have to get down and look up ward to see it - are you trying to access the auger motor, or the dispenser door mechanism ?

See also this download: http://appliantology.org/files/file/173-whirlpool-refrigeration-update-ud27-advanced-dispenser-system/

  • Like 1
Link to comment
Share on other sites

Auger motor. I'll recheck for that door when i return with the motor. Still think you have to remove door panel to change user interface though. I will report back with iphone pictures later next week.

Link to comment
Share on other sites

... stainless steel front door panel above the dispenser..

... No dispenser trim to remove as on traditional ice in door system.

see PDF page 49

"NOTE: There are two types of water and ice dispensers:

one for doors with panels, and the other for stainless steel trimless doors.

The front panels for each type of door are removed differently.

Refer to step 3 for paneled doors, or step 4 for stainless steel trimless doors,

to remove either type of front panel."

JOB AID 4317326A KAR-11

link PM'd 13 MB

  • Like 1
Link to comment
Share on other sites

Ok, poop daddy gets the win on this one. Access door was where he said it was. Took 2 minutes to change.

Thanks

  • Like 2
Link to comment
Share on other sites

×
×
  • Create New...