Need appliance parts? Call 877-803-7957 now or use the parts search box:

Parts Search

Learn appliance repair at online the Master Samurai Tech Academy.  Learn more.  Earn more.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

  • Announcements

    • Samurai Appliance Repair Man

      ***READ THIS PRIOR TO STARTING A NEW TOPIC***   05/02/2016

      Topics with the complete and accurate model number in the topic title will get priority attention. You can validate your model number by entering into the form on this page: http://www.repairclinic.com/?clearLs=true For more help on using Appliantology effectively, please see this page:  
Dontellmeicant

Front load washer Overflow mechanism?

5 posts in this topic

Frigidaire Front Loader.

Ok, I have:

Replaced the door latch (worked for a few loads)

Cleaned the pump, hoses in, hoses out, all clear.

Replaced the time and motherboard.

Washer fills with water and will not drain.

Any suggestions? I'm at the end of guesses.

Share this post


Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

does the Pump run ?

Are the hoses clear ?

Has this Washer worked OK for you up till now at this location ?

Share this post


Link to post
Share on other sites

What do you Guess the model # is? and donttellmeyoucant find it. :teehee:

Share this post


Link to post
Share on other sites

Yes, the pump works, hoses are clear and the washer has been working. Took another look last night and believe that the problem is the main drain. I live in an old house and the washer's drain hose is rigged directly into the main (nothing like the new plumbing). All hoses are clear until I get to an old junction and I think it is clogged there. Will do more investigation and check back.

Thanks for the help.

Share this post


Link to post
Share on other sites

So, apparentlly, when the washer began working again, it pumped out a ton of crap into the drain-out hose that then traveled to a very strange junction in the pipe leading to the main drain. And, if the water has nowhere to go, the pump does not pump. SOOO, long story short, put the washer hose into the sump pump housing, everything working like a charm. Now, to figure out the re-plumb on the out-hose. Thanks for responding!

Share this post


Link to post
Share on other sites