REMOVING A DRYER MOTOR FROM BLOWER WHEEL?
Posted 19 April 2012 - 03:58 PM
A SERIOUS PROBLEM I'VE RUN INTO IS REMOVING THE MOTOR FROM THE BLOWER WHEEL.
THE PAST 5 MOTORS I HAVE TRIED TO REMOVE I HAVE STRIPPED THE PLASTIC BLOWER WHEEL NUT HEAD THAT IS CONNECTED TO THE BACK OF THE MOTOR SHAFT.
I'VE WATCHED MULTIPLE VIDEOS TO MAKE SURE I AM TURNING IN THE RIGHT DIRECTION AND FOLLOWING EXACT INSTRUCTIONS.
EVERY TIME I HAVE TO DRILL OUT THE BLOWER WHEEL AND CUT THE SHEET METAL AWAY SO I CAN PULL THE MOTOR OUT FREE.
THEN I'M LEFT WITH A PERFECTLY GOOD MOTOR BUT HOW THE HELL TO GET THE PLASTIC CRAP OFF?
ID APPRECIATE ANY AND ALL TRICKS OR METHODS TO SALVAGING A PERFECTLY GOOD MOTOR FROM THE DAMN BLOWER WHEEL.
- COINCJEFCHISH likes this
Posted 19 April 2012 - 04:43 PM
Im pretty sure its all the same process getting these motors off the blower wheel.
Let me know whatcha think...
Posted 19 April 2012 - 10:00 PM
Leave the front clip on
use the biggest cresent wrench you can on the blower wheel.make it as tight on the plastic as you can.
rotate the cresent wrench to the right so it's up tight against the cabinet or drum roller shaft
then take a big pair of vise grips and lock it on the belt pulley, lock it in the 12:00 position as tight as possible.
then wrap some electrical tape around the vise grip to keep it from unlocking.
now take something solid an hit the vise grips to drive them clockwise.hit it hard
this works 90% of the time or more.
Posted 20 April 2012 - 01:06 AM
Any advice as to what to do once I have already cut away the blower wheel and have the motor free. The plastic crap is still stripped and all over the end of the motor shaft tho.
I have about 5 dryer motors like this. I was thinking about taking them down to an auto shop to see if they had any impact tools that could take the remainder of the blower wheel crap off.
What do you think?
Posted 21 April 2012 - 06:06 AM
- Samurai Appliance Repair Man likes this
The simplest explanation is most likely the correct and least expensive one, unless it's your compressor or motherboard" Occam as an appliantologist
"When you have eliminated all the impossible, whatever remains, however implausible, must be the logic truth; unless it's your compressor or motherboard." Mr. Spock as an appliantologist
"I think, therefore I have no earthly idea why this thing is not working...I got nothin'...". Rumored to have been uttered by a frustrated Descartes while diagnosing his GE Profile.
Recent blog entries on this topic
Read Full Entry →
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users