Appliantology Parts Search Box
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Fisher and Paykel DD605 LCD reads "34 min"
Started by Trey, Apr 30 2012 07:23 AM
Fisher Paykel Fisher and Paykel DD605 Fisher & Paykel 34 34 min 34 minutes LCD
2 replies to this topic
#1
Posted 30 April 2012 - 07:23 AM
I have a Fisher and Paykel DD605 (with LCD).
No matter which wash mode I select, it only says 34 min on the display. Even if adding the ECO mode, I get the same thing. I have unplugged and replugged in the washer and still the same problem.
I have pressed the start button and the machine locks the drawer and then beeps as if the wash is complete and reads "00" on the LCD display. Nothing more and nothing less.
The washing arm spins freely.
The bottom drawer is working perfectly well.
Anyone with some ideas?
No matter which wash mode I select, it only says 34 min on the display. Even if adding the ECO mode, I get the same thing. I have unplugged and replugged in the washer and still the same problem.
I have pressed the start button and the machine locks the drawer and then beeps as if the wash is complete and reads "00" on the LCD display. Nothing more and nothing less.
The washing arm spins freely.
The bottom drawer is working perfectly well.
Anyone with some ideas?
Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
#2
Posted 30 April 2012 - 09:06 PM
Well now youre going to have using your diagnostic skills. Find the tech sheet (behind the lower drawer) and start taking measurements. The heater should show about 25 ohms each track. Thermister, about 12K at R.T Water valves about 65 each. Stator about 33 ohms from leg to leg. If every thing checks out well, try swapping the controllers from top to bottom and then the LCD badges. Good luck
Bob
coastalappliances.com
Bob
coastalappliances.com
- Samurai Appliance Repair Man and RussTech like this
Robert Sankey
Coastal Appliance, Heating & Air
Website: www.coastalappliances.com
email: coastalserve@gmail.com
Coastal Appliance, Heating & Air
Website: www.coastalappliances.com
email: coastalserve@gmail.com
#3
Posted 01 May 2012 - 01:49 AM
sounds like a bad controller
swap them from top to bottom and see how you go
swap them from top to bottom and see how you go
- Samurai Appliance Repair Man and Trey like this
Also tagged with one or more of these keywords: Fisher, Paykel, Fisher and Paykel, DD605, Fisher & Paykel, 34, 34 min, 34 minutes, LCD
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
Your Sometimes-Lucid Host:
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."
ApplianceGuru.com | AppliancePartsResource.com | Fixitnow.com













