icemaker dispenses crushed ice only no cubes. looked at exploded view of dispenser/bucket on sears.com but not sure what parts i need to replace to get cubes. any ideas appreciated.
Appliantology Parts Search Box
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
2 replies to this topic
#1
kevinmac6591
-
- Grasshopper
-
- 20 posts
IkkÅ-ikki
- Flavorite Brew:lone star
Posted 04 May 2012 - 01:33 PM
Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
#2
kdog
-
- Academy Fellow
-
- 7,428 posts
RoughShod
- Location: Canada
- Flavorite Brew:Dickens Cider
Posted 05 May 2012 - 01:02 AM
Not unusual for the solenoid actuator for the metal arm of the icetray auger to seize up. It is located above the actuator stirrup at the back of the freezer - the actuator pin gets froze up and seizes and the solenoid melts down. Part Links below:
http://www.repaircli...er=363.58067890
http://www.repaircli...er=363.58067890
http://www.repaircli...er=363.58067890
- Samurai Appliance Repair Man likes this
Help us keep the lights on: buy appliance parts here ==> http://repairclinic.com
For service manuals and lots of other goodies, become an Apprentice ==> Apprenticeship
#3
jumptrout
-
- Academy Fellow
-
- 1,128 posts
Sensei
- Location: USA
- Flavorite Brew:Coors Light
Posted 05 May 2012 - 07:05 AM
Sometimes the ice bin rod gets out of position with the yoke at the rear of the bin.
Open the freezer door and look underneath the ice bin.
You will see the metal rod going into the opening for the solenoid in the back wall.
The rod must be IN not under the yoke.
If it is not IN,pull the bin out then push it back in so that the rod is IN the yoke.
Open the freezer door and look underneath the ice bin.
You will see the metal rod going into the opening for the solenoid in the back wall.
The rod must be IN not under the yoke.
If it is not IN,pull the bin out then push it back in so that the rod is IN the yoke.
- Samurai Appliance Repair Man and kdog like this
Recent blog entries on this topic
Sears Kenmore / GE refrigerator only dispenses crushed ice, no cubes
By Samurai Appliance Repair Man in Samurai Appliance Repair Man's Blog, on 05 May 2012 - 08:11 AMNot unusual for the solenoid actuator for the metal arm of the icetray auger to seize up. It is located above the actuator stirrup at the back of the freezer - the actuator pin gets froze up and seizes and the...
Read Full Entry →
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
Your Sometimes-Lucid Host:
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."
ApplianceGuru.com | AppliancePartsResource.com | Fixitnow.com
