Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

reapair/diagnostic manual needed Bosch


northcaver

Recommended Posts

northcaver

Please send me a repair /dignostic manual for Bosch washer WFMC 530CUC/10

need to diagnose why it isnt spinning (not off balance)

Thank you!

Link to comment
Share on other sites

northcaver

Thanks for the links kdog, but I am having a problem using the diagnostic test on my washer model..WFMC 530cuc/10...are there any other manuals available that would have the diagnostic routine for this model?

Link to comment
Share on other sites

northcaver

Groan...I thought I had it figured out..not. I follow the diagnostic prescribed routine to pull the error codes off of the machine, and I cant get the bugger to do it...it just stays lit as if I am going to start a load of clothes. what am I doing wrong? Anyone????

Link to comment
Share on other sites

WFMC53

Entering & using WFMC32/33/43/53 test programs:

•To reset, rotate cycle selector knob to OFF position.

•To enter test program, push and hold SPIN SELECTION and DELAY START buttons at the same time,

then rotate cycle selector knob CCW to PERMANENT PRESS COLD position.

Continue holding SPIN SELECTION and DELAY START buttons until P:01 shows in display.

•To select tests, push SPIN SELECTION button (to scroll through tests) until desired test shows in display (P:01 - P:17)

START/PAUSE light will flash.

•To start tests, push START/PAUSE button while its light is flashing -- light stays lit when test has started.

To end tests, push SPIN SELECTION button.

•To exit test program, rotate cycle selector knob to OFF position.

  • Like 1
Link to comment
Share on other sites

×
×
  • Create New...