reapair/diagnostic manual needed Bosch
Posted 06 May 2012 - 04:02 PM
need to diagnose why it isnt spinning (not off balance)
Posted 06 May 2012 - 04:05 PM
- Samurai Appliance Repair Man likes this
Help us keep the lights on: buy appliance parts here ==> http://repairclinic.com
For service manuals and lots of other goodies, become an Apprentice ==> Apprenticeship
Posted 06 May 2012 - 07:45 PM
Posted 06 May 2012 - 07:53 PM
Posted 07 May 2012 - 12:19 AM
Posted 07 May 2012 - 04:26 AM
Entering & using WFMC32/33/43/53 test programs:
•To reset, rotate cycle selector knob to OFF position.
•To enter test program, push and hold SPIN SELECTION and DELAY START buttons at the same time,
then rotate cycle selector knob CCW to PERMANENT PRESS COLD position.
Continue holding SPIN SELECTION and DELAY START buttons until P:01 shows in display.
•To select tests, push SPIN SELECTION button (to scroll through tests) until desired test shows in display (P:01 - P:17)
START/PAUSE light will flash.
•To start tests, push START/PAUSE button while its light is flashing -- light stays lit when test has started.
To end tests, push SPIN SELECTION button.
•To exit test program, rotate cycle selector knob to OFF position.
- kdog likes this
one of my video productions: “Easter Seals: Walk With Me”
every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962
RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users