Need appliance parts? Call 877-803-7957 now or use the parts search box:

Parts Search

Learn appliance repair at online the Master Samurai Tech Academy.  Learn more.  Earn more.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

  • Announcements

    • Samurai Appliance Repair Man

      ***READ THIS PRIOR TO STARTING A NEW TOPIC***   05/02/2016

      Topics with the complete and accurate model number in the topic title will get priority attention. You can validate your model number by entering into the form on this page: http://www.repairclinic.com/?clearLs=true For more help on using Appliantology effectively, please see this page:  
richards

Sub Zero 601F Ice buildup and moisture in ice bin

7 posts in this topic

The metal bar that goes across the back of the freezer has a wall of ice on it. The ice in the basket tends to quickly turn into a block of ice (more so in the back of the drawer). What's causing this? How can it be resolved? I found info on the web that indicates a part that heats the trough should be added, but it appears to no longer be made.

Thank you in advance for you input.

-Richard

Share this post


Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

pictures ?

Share this post


Link to post
Share on other sites

Could be a defrost failure; could be a leaking ice maker. Need a visual. Post some photos like GMF Reg suggested.

Share this post


Link to post
Share on other sites

Here are the images. There is water fall shaped ice on the metal bar on the non-icemaker side and both above and below the icemaker.u0xz42w15vqbz27qc7ar_c.jpg

ci24j4e8paw8mbxcrdhy_b.jpgbgb222bhu64reskufuu_a.jpg

Share this post


Link to post
Share on other sites

Looks like a frozen condensate drain. You'll need to remove the icemaker and the back inside wall to clear the ice from the trough and then clear the drain. You'll need to add a condensate drain heater kit or it'll happen again.

Share this post


Link to post
Share on other sites

Thank you. Do you happen to have a part number for the kit?

Share this post


Link to post
Share on other sites

When you take ice maker and trough cover off there will be a bi-metal you need to check while it is cold. Not main defrost bi-metal. If lower bi-metal is closed trough and drain heaters will need replaced.

Share this post


Link to post
Share on other sites