Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

service manual request: Dacor Range Model# ERD48SCP


appliance repair tech

Recommended Posts

hello, i am looking for a service manual for a decor range, model# ERD48SCP

thank you.

Link to comment
Share on other sites

  • Replies 6
  • Created
  • Last Reply

Top Posters In This Topic

  • appliance repair tech

    4

  • RegUS_PatOff

    3

Top Posters In This Topic

hello, symptons are f2 fault code appearing intermittantly, temperature not maintaining to set point and some relay can be heard clicking away rapidly at times, if oven is set at 350 degrees, it will preheat fine, and while monitoring temperature with a digital thermometer and a thermocouple in oven i can see my high end at approx 368 degrees and low end at approx 314 degrees and this is normal, but then i will watch the temperature and sometimes on the climb back up and it will only go as high as 320 degrees and a low of around 300 degrees and this is not a normal cycle when the set temp is 350 degrees and the end result is food that ends up undercooked so i am lookimg for a service manual to see what decor is suggesting for diagnostic testing to determine solution.

also the cooling fan for the electronics is turning on at the proper temperature of approx 190 degrees to keep the electronics cool.

Link to comment
Share on other sites

-F2- Alarm Heating Mode High Temperature

Is activated when the ERC senses a runaway heat condition or when the temperature exceeds “runaway limits”.

The ERC will beep until the cancel or another function is selected.

If the alarm repeats the F2 alarm check the oven sensor and wiring after first checking for a stuck relay.

If alarm goes away verify the oven will complete a clean cycle without any type of failure.

Classic ERC Failure Codes Back.pdf

Diagnostic_Manual.pdf

links PM'd

Link to comment
Share on other sites

hello, the pssible stuck relay that the f2 fault references to , is that a relay on the erc or on some other relay board in the oven, also is there any type of manual that shows the parts layouts or schematics or dissassembly procedures that are available, thank you.

Link to comment
Share on other sites

PM_ERD48_2012-06-11-Web.pdf

link Pm'd

Link to comment
Share on other sites

THANK YOU FOR THE LAST PM SENT TO ME OF THE PARTS CATALOG OF THE DACOR RANGE THAT I AM WORKING ON, ALTHOUGH IT SAYS ITS A PARTS CATALOG IT GIVES GREAT VISUAL OF BOTH THE PARTS AND LAYOUT OF EVERYTHING, AGAIN THANK YOU.

Link to comment
Share on other sites


×
×
  • Create New...