How Assuming Made an Ass-a-me
Posted 02 July 2012 - 05:15 AM
Customer bought a brand new Kenmore in-wall A/C. Big and heavy, he had it mounted in a pre-existing case at floor level, plugged into an outlet beneath it. The symptom was when turned on, the blower would start, but as soon as the compressor tried to start the display would flash "8's", then shut down. This pattern would keep repeating itself. He had new trim installed around the A/C , so I couldn't remove the unit from the wall without first removing the trim. He proceeds to holler and yell how expensive the trim was. Was I going to pay to have it removed? On and on. Yell and yell. I told him to remove it and I'd return.
I come back that night and he's like old friends. 'Course he has company standing around to impress. Even had the unit resting on a blanket on the floor. I tear into it. After an hour of head-scratching and trying to make sense of weird voltages to the compressor, I figure it must be a bad control board. Ordered up said board. Another tech arrives few days later to install board. Same symptoms. He calls a Tech support line who advised him to order display board. I return few days later, installed display board. Still flashing 8's.
I take another voltage reading at the compressor and THIS time find 120v to EACH of the compressor contacts. A light slowly begins to dawn.
I check his house recept and find 220 Volts wired to a 120volt outlet!
When I informed the guy why his A/C, a 120v unit wouldn't run on twice the voltage, HE LOOKED AT ME LIKE I HAD TWO HEADS AND TOLD ME IT'S OUR FAULT WE NEVER TOLD HIM HE HAD A 120V UNIT AFTER FIRST TELLING ME HE DIDN'T KNOW THERE WAS 220V AT THAT PLUG!
From now on, I NEVER assume the customer knows the first thing about hooking up an appliance, but check voltage and polarity right off the bat.
By the way, the customer refused to pay for any of the parts and labor.
Posted 02 July 2012 - 10:55 AM
Can I hear an, "Amen?"
Posted 03 July 2012 - 06:57 AM
Willie's Budget Appliance Repair
Eureka, CA 95501
Posted 05 July 2012 - 06:52 PM
Posted 05 July 2012 - 07:21 PM
Fool me 237 times, shame on me.
Need parts? Call our Parts Department now! 877-803-7957
Posted 16 July 2012 - 05:39 AM
Remember rule #1 of appliance repair: VERIFY VOLTAGE FIRST.
Open neutrals get me once in awhile, takes me a minute to figure out why I have power when I measure voltage to ground (as I forget to verify the neutral)...
- Samurai Appliance Repair Man likes this
We, the unwilling, led by the unknowing, are doing the impossible for the ungrateful. We have done so much, for so long, with so little, we are now qualified to do anything with nothing.
The views and opinions expressed in this post are those of the author and do not necessarily reflect nor represent the views and opinions held by my employer. All data and information provided is for informational purposes only.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users