Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Bosch SHE44C02UC/22


jstorii

Recommended Posts

Dear Samaurai Sensei,

I need the service manual for a Bosch SHE44C02UC/22 dishwasher. Do you have?

thanks,

Jstorii

Link to comment
Share on other sites

  • Team Samurai

Sho nuff, budrow, come n' git it ==>

Link to comment
Share on other sites

My model number is SHE44C02UC/22. The service manual your linded is for SHU43C05UC36, SHE* SHX* SHV*

Will that service manual apply to my model also?

thanks

Link to comment
Share on other sites

  • Team Samurai

"SHE*" right in the title. I'd go with it.

Link to comment
Share on other sites

The manual covers the SHE as the Samurai said. You just have to read all the notes and hints to apply it to some models including the SHE.

What is wrong with yours?

Link to comment
Share on other sites

Thanks.

When I hit the on/off button, immediately a motor (drain pump motor?) is running.

Diagnostic code read, C1

From reading comments, I thought maybe either float or inlet valve.

I took off kickplate, but wondering what to do next procedurally. I figured the service manual might be helpful to tell me steps.

Thanks

Link to comment
Share on other sites

When any dishwasher is turned on the first action is to drain any residual water left in the unit.

Your C1 code is most likely a bad control board.

If you remove the control facia and remove the control board you will most likely find a burned contact on the board.

You might try re-soldering the burned contact.

If that does not work then youe get this:

http://www.repairclinic.com/PartDetail/Main-Control-Board/676960/1557799?modelNumber=SHE44C02UC%2022

  • Like 1
Link to comment
Share on other sites

  • 1 month later...

Does anyone have a wiring diagram for the SHE44 range?

I have a 6 year old one that is dead. No lights no sign of life.

I determined that the main controller board was dead as there is power reaching it.

Replaced the board and it ran for 15 minutes, the dishwasher emitted smoke and after a small "pop" sound, the board is dead again.

The controller circuit board is still very clean. No sign that the smoke came from there. Does not even smell bad. I suspect a short in the heater or somewhere else.

A wiring diagram and/or any clues would be greatly appreciated.

many thanks

Mc Blue

Link to comment
Share on other sites

×
×
  • Create New...