2 replies to this topic

[Samurai Appliance Repair Man]

In this exciting episode, Samurai Appliance Repair Man shows you how to troubleshoot a gas oven where the igniter glows but the burner won't fire up. Note that an ignitor can glow and still be bad-- in fact, this is the most common case. You have to measure the current draw to tell whether the ignitor is good or not. You can buy a replacement ignitor for your gas oven or range here with a 365-day return policy ==> http://www.repaircli...arch=Find Parts




You can find whatever appliance part you need through the parts search box right here at The Appliantology Academy. No harm in buying and trying with our 365-day, no-hassle return policy, even on electrical parts that were installed!

Subscribe to our FREE, award-winning newsletter, Appliantology: The Oracle of Appliance Enlightenment ==> http://newsletter.appliantology.org and download your free report on appliance brand recommendations! Every issue is jam-packed with appliance repair tips and inside information direct from the Samurai's fingertips to your engorged and tingling eyeballs.

The Appliance Guru provides prompt, convenient service in the following towns in New Hampshire: New London, Elkins, Wilmot, Springfield, Georges Mills, Sunapee, Mt. Sunapee, Newbury, Sutton, Bradford, Warner, Grantham, and the Eastman Community. Visit our website for more info and a discount coupon on your next service call: ==> http://applianceguru.com

[RegUS_PatOff]

... current reading after about 30 - 45 seconds

[Samurai Appliance Repair Man]

Yes, good point. When you first turn on bake, you can actually watch the current draw gradually increase and level out after about 30-45 seconds, as you said.