POWER TOOL SHOCKZAPPED!
Posted 14 July 2012 - 09:42 PM
PLEASE tell me a SIMPLE WAY to use a multimeter (ohms setting) to check BOTH a 2 and 3 prong power tool for current leakage.
Doesn't the switch have to be in the "ON" position when testing?(Power tool unpluged).
What are the Specific Readings of Resistance I should have.
This is what I think in each case.
3 prong infinite(2 prongs) ground prong zero
I CAN NOT find this on YOUTUBE.
Thank you for being patient. I haven't mastered how to post and such correctly.
- WayncnamGon likes this
Posted 19 July 2012 - 05:28 PM
Seriously... Isnt this a repost? Two wire tools are double insulated. Are you checking for safety or what? You could check for voltage from the metal housing to ground (of a outlet) while running, any would be bad. Three wire would be basically the same. Voltage from housing to ground is bad. Or check resistance from the housing to the plug ends. The only one that should have any is tool housing to ground prong of three wire.
If posting a question in the same topic Is this complicated, maybe you should invest in cordless tools
Edited by Bullstok, 19 July 2012 - 05:34 PM.
Posted 19 July 2012 - 06:33 PM
If it ever "trips", may be time for a new tool.
one of my video productions: “Easter Seals: Walk With Me”
every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962
RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users