Have this Maytag washer model no SAV5710AWW that is making a loud banging noise in the spin cycle only.It fills, agitate good with no noise.But when it goes into the spin cycle it makes a loud banging noise.What could be causing this noise?It will spin but makes this loud banging noise,kinda like something is wobbleing around.
Appliantology Parts Search Box
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Maytag SAV5710AWW noise
Started by llky, Jul 21 2012 08:30 PM
6 replies to this topic
Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
#2
Samurai Appliance Repair Man
-
- Fermented Grand Master
-
- 24,360 posts
Your Sometimes-Lucid Host
- Location: USA
- Flavorite Brew:Kirin Ichiban
Posted 21 July 2012 - 08:32 PM
A machine gun sound? Probably a bad helix ==> http://www.repaircli...mber=SAV5710AWW
Replace the pulley, too ==> http://www.repaircli...mber=SAV5710AWW
Replace the pulley, too ==> http://www.repaircli...mber=SAV5710AWW
FAQs | Parts | Memberships | Consultations | Repair Videos | Newsletter | Beer Fund | Contact
#3
llky
-
- Chief Appliantologist
-
- 170 posts
Sōhei
Posted 21 July 2012 - 08:45 PM
Thanks for the reply and the help.
#4
llky
-
- Chief Appliantologist
-
- 170 posts
Sōhei
Posted 21 July 2012 - 08:51 PM
Does anyone have any info or help on how to check out and change the helix and pulley?
#5
Budget Appliance Repair
-
- Academy Fellow
-
- 4,001 posts
Sensei
Posted 22 July 2012 - 08:10 AM
A very easy repair, just one bolt holds pulley and helix in place,remove belt from transmission pulley, remove bolt, remove old helix and pulley and reinstall new helix and pulley, (put a little silicone lube on new helix and pulley mating surfaces).
- Samurai Appliance Repair Man likes this
William Burk (Willie)
Willie's Budget Appliance Repair
Eureka, CA 95501
Willie's Budget Appliance Repair
Eureka, CA 95501
#6
llky
-
- Chief Appliantologist
-
- 170 posts
Sōhei
Posted 22 July 2012 - 11:48 AM
Thanks for the info.I'm going to check out the replacement of the helix and pulley.
Recent blog entries on this topic
How to fix a Maytag / Amana Top-Loading washer that makes a machine gun noise during spin
By Samurai Appliance Repair Man in Samurai Appliance Repair Man's Blog, on 22 July 2012 - 12:48 PM
Professor Willie explains:
A very easy repair, just one bolt holds pulley and helix in place,remove belt from transmission pulley, remove bolt, remove old helix and pulley and reinstall new helix and pulley, (put a...
A very easy repair, just one bolt holds pulley and helix in place,remove belt from transmission pulley, remove bolt, remove old helix and pulley and reinstall new helix and pulley, (put a...
Read Full Entry →
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
Your Sometimes-Lucid Host:
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."
ApplianceGuru.com | AppliancePartsResource.com | Fixitnow.com
