Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 4/27/2024 @10 AM ET
      27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Frigidaire Range m#FES365EQA

cuzzin sam

By cuzzin sam
in DIY Appliance Repair Help

 Share

Recommended Posts

cuzzin sam Sōhei

cuzzin sam

Posted
Posted

This one is allmost too embarrassing to ask but...I suspect a circuit board problem but,but...I can't get the control panel off. When you stop laughing, when you regain control and your breathing is normal...I see a couple of screws on the bottom edge but that doesn't seem to help so...I'll shut up now and wait.

Link to comment
Share on other sites
  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • cuzzin sam

    2

  • Budget Appliance Repair

    1

  • RegUS_PatOff

    1

Popular Days

Top Posters In This Topic

Popular Days

RegUS_PatOff Sensei

RegUS_PatOff

Posted
Posted

00717698.jpg

... I can't get the control panel off.

... When you stop laughing

looks like 6 Screws ... rofl.gif

(holes in # 16)

(looking for service manual)

R0510077-00001.png

Link to comment
Share on other sites
Budget Appliance Repair Sensei

Budget Appliance Repair

Posted
Posted (edited)

You need to take the control overlay off first to get to the screws to remove the control panel.

Remove all the knobs and take the nuts off each control switch and the overlay will lift out the it will be obvious from there.

The nuts under the knobs are NOT what hold the infinite switches in place, they each have two normal inf switch mounting screws like you would find on normal ranges once you remove the overlay.

It took me probably 15 - 20 minutes to figure out that was the way to get in on the first one of these I worked on.

Edited by Budget Appliance Repair
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...