Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

LG dryer DLE7177RM manual needed Please


mf4880

Recommended Posts

  • Replies 4
  • Created
  • Last Reply

Top Posters In This Topic

  • mf4880

    3

  • RegUS_PatOff

    2

Top Posters In This Topic

What is the difference between the dryer you provided a manual for, which is DLE7177WM.

My dryer is a DLE7177RM.

It is an electric dryer and it is slowly not drying the clothes.

It has gotten gradually worse.

Now it will hardly dry at all.

It runs the whole time just not enough heat

Thanks

Edited by mf4880
Link to comment
Share on other sites

... What is the difference between ... DLE7177WM ...My dryer is a DLE7177RM.

... Now it will hardly dry at all.

1) DLE7177WM is white, DLE7177RM is red

2) how's the Vent ?

Dryer Vent

Vent should be rigid metal.

Short lengths of flexible metal may be OK, if not crimped when moving the Dryer into place.

NO plastic

NO PVC

NO screws

Foil Duct Tape is OK.

With an empty load, Timed Dry, High Heat, the vent temperature should cycle somewhere between 135F and 160F

Check / clean the Dryer Vent

Disconnect the Dryer Vent and check for good air-flow there and where it exits the house.

Check the Vent air temperature at the back of the Dryer.

If you have a Harbor Freight Store near you,

click on picture sometimes on sale for $ 2.99

image_1255.jpg

Link to comment
Share on other sites

I will dig into it. I know the vent is only about 2ft long and all rigid pipe, no screws.

Thank you for the model # insite.

Thanks

Link to comment
Share on other sites


×
×
  • Create New...