Bosch BIDW Shu6805UC/U12SHU6805UC/U12
Posted 15 August 2012 - 09:40 PM
I don't work on these units but this is a favor for a good friend. The complaint is that the machine get stuck in the cycle for a couple of hours just washing. Also the wife claims poor results and water spots on all and especially the dishes in the top rack. Claims she runs water in sink first and wash/ drain action seems just fine. Also said not much of a problem on the quick wash. Might this be the board solder connection I have heard in the forums? I looked at the board and saw a large solder connection that looked slightly very slightly scorched. Any help would be appreciated as I'm in the hot seat on this one . Other servicers have been out in the past and told them it was O.K. no prob. found and the extended warr. is over. Also I would like to get the manual for this model.
Posted 16 August 2012 - 06:52 AM
Would you recommend re-soldering the relays or replacing the controller? I don't see a break in the joints, just a slight discoloration on a large joint. Might have always been like that. Is there a schematic available so I can check it better?
Posted 16 August 2012 - 07:52 AM
DIYers: Save time and money by learning the secrets of appliance repair... Click Here!
Also tagged with one or more of these keywords: SHU6805UC/U12
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users