jlb813 Posted August 17, 2012 Share Posted August 17, 2012 Washer will not spin. Need service manual. Thanks. Link to comment Share on other sites More sharing options...
Team Samurai Samurai Appliance Repair Man Posted August 17, 2012 Team Samurai Share Posted August 17, 2012 What you really need is the tech sheet; it's located behind the front panel below the door. Tilt the washer up and prop on some wood blocks to facilitate removing that panel. Tech sheet is taped to inside wall, left-hand side. Go into service mode and retrieve error codes. Anything in the 40's, replace the door latch assembly ==> http://www.repairclinic.com/PartDetail/Door-Lock/131763202/1531974?modelNumber=LTF6000ES1 Link to comment Share on other sites More sharing options...
jlb813 Posted August 17, 2012 Author Share Posted August 17, 2012 I searched for the tech sheet, but cannot find it. It was repaired a few months ago and the owner thinks the tech removed the tech sheet and didn't replace it. If you have anything on it I could sure use it. Thanks. Link to comment Share on other sites More sharing options...
RegUS_PatOff Posted August 18, 2012 Share Posted August 18, 2012 134604100ts_wd_efs.pdflink PM'd Link to comment Share on other sites More sharing options...
jlb813 Posted August 18, 2012 Author Share Posted August 18, 2012 Thanks for the data sheet. The washer is showing an E47 code. I think the door switch is bad, but I'm not sure how to check it. The sheet says check the resistance of the PTC (don't know what that stands for). I'm not sure how to do that. It says if the PTC reads 1500 0hms to replace the control board so I want to make sure which part is bad. I can use an ohm meter but I'm not sure where to check. Do you know if I order the part today how long it will take to get it? Link to comment Share on other sites More sharing options...
Team Samurai Samurai Appliance Repair Man Posted August 18, 2012 Team Samurai Share Posted August 18, 2012 The door switch is bad, I guarantee it. I keep 2 in my service vehicle because I replace them so frequently. If you order via second day or overnight shipping, your order will ship today and you would have it Monday or Tuesday. If you order via regular FedEx ground your order would ship on Monday and you would probably have it Wednesday depending on where you are relative to Michigan. I'm in New Hampshire and when I order parts via regular FedEx ground from repair clinic, I always get them in 2 days. Link to comment Share on other sites More sharing options...
jlb813 Posted August 18, 2012 Author Share Posted August 18, 2012 Thanks. I am ordering 2 today. Link to comment Share on other sites More sharing options...
Team Samurai Samurai Appliance Repair Man Posted August 18, 2012 Team Samurai Share Posted August 18, 2012 Just replaced another Friggy door latch assy on a service call today. Cha-ching! Link to comment Share on other sites More sharing options...
Recommended Posts