Washer starts/ stops, F1 error code flashes, Tech sheet says replace main motor control board, Help with part # please.
Appliantology Parts Search Box
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Welcome to Appliantology.org, the Web's Premiere Appliance Repair Resource for DIYers!
We have loads of repair manuals, photos, diagrams, personal instruction, and appliance parts-- everything you need to get it fixed and fixed right away!
You can post a question and get repair help for FREE! Click here to get started.
Already a member of the Appliantology Academy? Just sign in with your username and password in the upper right-hand corner of the screen.
7 replies to this topic
#1
prairiestr
-
- Chief Appliantologist
-
- 197 posts
Sōhei
- Flavorite Brew:Jack
Posted 17 August 2012 - 04:29 PM
Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
#2
RegUS_PatOff
-
- Grand Master Funk
-
- 30,700 posts
Sensei
- Location: USA
- Flavorite Brew:Chief NTSC Black & White
Posted 17 August 2012 - 07:15 PM
F1 Pressure Signal Out-of-Range
F then 1 flashes when the control detects an out of range pressure signal.
➔ Check pressure hose connection from tub to machine/motor control.
Is hose pinched or kinked?
➔ If F then 1 repeats numerous times after POWER is pressed
and the pressure hose connection is not pinched or kinked,
replace the machine/motor control.
http://www.repaircli...tDetail/1469076
.
one of my video productions: “Easter Seals: Walk With Me”
every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962
RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw
one of my video productions: “Easter Seals: Walk With Me”
every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962
RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw
#3
prairiestr
-
- Chief Appliantologist
-
- 197 posts
Sōhei
- Flavorite Brew:Jack
Posted 17 August 2012 - 08:40 PM
Reg, control shows F1, not F then 1. I may have read the tech sheet wrong, do you have a copy? Did not notice any problems with the pressure hose, also tub was empty and only small amuont of water came in before failure code. Customer says she can get it to start occasionally by pushing start repeatedly.
#4
RegUS_PatOff
-
- Grand Master Funk
-
- 30,700 posts
Sensei
- Location: USA
- Flavorite Brew:Chief NTSC Black & White
Posted 17 August 2012 - 09:30 PM
previous post should have read:
F
. 1 Pressure Signal Out-of-Range
Tech Sheet - W10026571.pdf
link PM'd
F
. 1 Pressure Signal Out-of-Range
Tech Sheet - W10026571.pdf
link PM'd
.
one of my video productions: “Easter Seals: Walk With Me”
every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962
RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw
one of my video productions: “Easter Seals: Walk With Me”
every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962
RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw
#5
Budget Appliance Repair
-
- Academy Fellow
-
- 4,032 posts
Sensei
Posted 18 August 2012 - 06:01 AM
What you are describing is almost always a bad control module, (I've never had it be any thing but a control module on the 3 or 4 that I have seen and worked on).
Whirlpool put out a tech bulletin on this F1 problem, (October 2008 L8178767).
Models: WTW6200S, WTW6300S, WTW6400S, WTW6600S, WTW6700T,
MTW6300T, MTW6400T, MTW6500T, MTW6600T, MTW6700T
Serial # range: CT01 - CU52
The bulletin basically says to check every thing to do with the pressure hose for moisture in the hose, holes in hose or kinked hose and to check the air bell for lint or any other debris.
And then last step if all checks OK, REPLACE THE CONTROL MODULE.
Whirlpool put out a tech bulletin on this F1 problem, (October 2008 L8178767).
Models: WTW6200S, WTW6300S, WTW6400S, WTW6600S, WTW6700T,
MTW6300T, MTW6400T, MTW6500T, MTW6600T, MTW6700T
Serial # range: CT01 - CU52
The bulletin basically says to check every thing to do with the pressure hose for moisture in the hose, holes in hose or kinked hose and to check the air bell for lint or any other debris.
And then last step if all checks OK, REPLACE THE CONTROL MODULE.
Edited by Budget Appliance Repair, 18 August 2012 - 06:10 AM.
William Burk (Willie)
Willie's Budget Appliance Repair
Eureka, CA 95501
Willie's Budget Appliance Repair
Eureka, CA 95501
#6
prairiestr
-
- Chief Appliantologist
-
- 197 posts
Sōhei
- Flavorite Brew:Jack
Posted 18 August 2012 - 01:51 PM
Budget and Reg.,
Thank you for the info, I think I'm convinced the control module is bad. This is ser# CT 48....
Thanks for the help.
Thank you for the info, I think I'm convinced the control module is bad. This is ser# CT 48....
Thanks for the help.
#7
RegUS_PatOff
-
- Grand Master Funk
-
- 30,700 posts
Sensei
- Location: USA
- Flavorite Brew:Chief NTSC Black & White
Posted 18 August 2012 - 03:40 PM
8178767.pdfWhirlpool put out a tech bulletin on this F1 problem, (October 2008 L8178767).
Models: WTW6200S, WTW6300S, WTW6400S, WTW6600S, WTW6700T,
MTW6300T, MTW6400T, MTW6500T, MTW6600T, MTW6700T
.
one of my video productions: “Easter Seals: Walk With Me”
every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962
RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw
one of my video productions: “Easter Seals: Walk With Me”
every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962
RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw
#8
prairiestr
-
- Chief Appliantologist
-
- 197 posts
Sōhei
- Flavorite Brew:Jack
Posted 19 August 2012 - 04:56 PM
Reg.,
Thank you for the service pointer, great info.
I owe ya one.
Thank you for the service pointer, great info.
I owe ya one.
Also tagged with one or more of these keywords: F1 error code
Appliantology Appliance Repair Forums →
Enrolled Student's Classroom →
GE Wall oven JKP13G0P1BGStarted by jambatt, 12 Jun 2012  F1 Error Code
|
|
|
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
Your Sometimes-Lucid Host:
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."
ApplianceGuru.com | AppliancePartsResource.com | Fixitnow.com
