Asko w660 blank display panel
Posted 30 August 2012 - 06:12 PM
I have an Asko W660 with a display panel that suddenly went completely blank when putting in a load of washing. The red power light is still working, and the fuse looks fine, but the machine's completely dead otherwise. I had a look at the main control board, and that looks fine, no obvious damage. Same with the mains filter.
I have the wiring schematic, so tested the voltages on the board, and discovered that the voltage to the display panel is about 6V instead of 13V. I don't want to buy a new control board, as I don't think the machine's worth spending that much on, so I'm keen to investigate whether I can replace the transformer on the board? Problem is how to search for the part -- is it likely to be fairly generic, or will it be very hard to locate? I can send some photos if that helps...
Posted 30 August 2012 - 06:56 PM
Posted 01 September 2012 - 05:42 PM
... and I'm getting good mains voltage to the main control board.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users