Jump to content


Learn appliance repair at the Samurai Tech Academy.  Learn more.  Earn more.


Use this Search Box to Find Appliance Repair Help Now
Need help finding your model number?
365-day return policy on all parts purchased here, even electrical parts that have been installed!


FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


Welcome to Appliantology.org, the Web's Premiere Appliance Repair Resource!

The world-famous Samurai Appliance Repair Forums


You can post a question and get repair help for FREE! Click here to get started.


Already a member of the Appliantology Academy? Just sign in with your username and password in the upper right-hand corner of the screen.

 


Photo

Frigidaire Freezer GLFU2067FW2 - CE error code

CE error code Frigidaire Freezer

  • Please log in to reply
9 replies to this topic

#1 deanfaw1

deanfaw1

    Yamabushi

  • Master Appliantologist
  • PipPip
  • 77 posts

Posted 05 September 2012 - 08:19 PM

Frigidaire Freezer GLFU2067FW2 - CE error code
This simple freezer is driving me crazy because it's usually the simple crap that throws us for a wild goose chase. The CE error keeps comming up and the unit just beeps. I tried resetting it both at the display board and via a hard reset. Nothing worked. The freezer is at proper temp 0F on the dot both on my meter and the display. I'm thinking the CE is for communication error but I could be wrong. It say opperational error on the error code sheet contact technician. Evap fan runs compressor runs fine. Anyone ever run into this issue before? I replaced main pcb and display pcb and still have the same error. Please help.

Thanks,

Dean

Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

#2 RegUS_PatOff

RegUS_PatOff

    Sensei

  • Academy Instructor
  • PipPipPipPipPip
  • 33,588 posts
  • Location: USA
  • Flavorite Brew:Chief NTSC Black & White

Posted 05 September 2012 - 08:46 PM

does the display alternate between CE and the temperature ?
Does it also beep every 5 seconds ?
Does the Alarm / Reset turn the beep OFF ?
.

one of my video productions: “Easter Seals: Walk With Me”

every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962

RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw

#3 deanfaw1

deanfaw1

    Yamabushi

  • Master Appliantologist
  • PipPip
  • 77 posts

Posted 05 September 2012 - 08:52 PM

Yes. All of the above.

#4 kdog

kdog

    RoughShod

  • Appliantology Fellow
  • PipPipPipPipPip
  • 7,465 posts
  • Location: Canada
  • Flavorite Brew:Dickens Cider

Posted 05 September 2012 - 10:42 PM

Check for broken wire in the door between the lower hinge and the control
Help us keep the lights on: buy appliance parts here ==> http://repairclinic.com

For service manuals and lots of other goodies, become an Apprentice ==> Apprenticeship

#5 RegUS_PatOff

RegUS_PatOff

    Sensei

  • Academy Instructor
  • PipPipPipPipPip
  • 33,588 posts
  • Location: USA
  • Flavorite Brew:Chief NTSC Black & White

Posted 05 September 2012 - 11:12 PM

User interface display shows “CE”.
This indicates a communication error between the user interface and electronic module.

1. Check the connectors in the wiring between the user interface and electronic module.
2. Replace the user interface.
3. Replaced electronic module.
4. Re-check the wiring
5. Replace the Door.
.

one of my video productions: “Easter Seals: Walk With Me”

every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962

RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw

#6 certified tech group 51

certified tech group 51

    Sensei

  • Appliantology Fellow
  • PipPipPipPipPip
  • 2,578 posts
  • Location: USA

Posted 06 September 2012 - 09:33 AM

I will double down with kdog..... ( look close at the zip tied wire harness )...........Some where out there, there are some pictures of a repair I done did on this type of failure.....Gotta figure out how to find 'all posts started' by poster, cuz it was a while ago................The first repair I performed for this failure, all I did was, replaced the wires from the control box to the display and taped the display to the rear of the unit..( freezer is in the middle of the floor at the end of a counter )...

#7 kdog

kdog

    RoughShod

  • Appliantology Fellow
  • PipPipPipPipPip
  • 7,465 posts
  • Location: Canada
  • Flavorite Brew:Dickens Cider

Posted 07 September 2012 - 12:21 AM

http://fixitnow.com/...orfreezer-door/
Help us keep the lights on: buy appliance parts here ==> http://repairclinic.com

For service manuals and lots of other goodies, become an Apprentice ==> Apprenticeship

#8 deanfaw1

deanfaw1

    Yamabushi

  • Master Appliantologist
  • PipPip
  • 77 posts

Posted 09 September 2012 - 09:18 PM

thanks guys I will take this advice out to the field to finish this job off. I have a sneaky suspicion that there is a broken wire at the zip tie underneath the door hinge. I will track this problem down. I will let you know. Thanks,

Dean

#9 deanfaw1

deanfaw1

    Yamabushi

  • Master Appliantologist
  • PipPip
  • 77 posts

Posted 25 September 2012 - 03:51 PM

Thanks guys it was a broken harness inside the door. The control panel is now at the toe kick location on the far right side. Owner approved work around. Thanks guys.

#10 Samurai Appliance Repair Man

Samurai Appliance Repair Man

    Shōgun

  • Master Samurai Tech
  • 29,442 posts
  • Location: USA
  • Flavorite Brew:Sapporo Original Draft Rice Lager

Posted 26 September 2012 - 05:46 AM

The control panel is now at the toe kick location on the far right side. Owner approved work around. Thanks guys.


Clever fix! Would love to see a photo if you have one.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users


FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

Your Sometimes-Lucid Host:
Samurai Appliance Repair Man
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."


The Appliance Guru | Master Samurai Tech

Real Time Analytics