Jump to content
Click here to check out our on-demand appliance repair training webinars.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Frigidaire Ref. GLRS267ZAW4 service manual needed please


jonesappliancesvc

Recommended Posts

jonesappliancesvc

Replaced broken water paddle now auger motor runs all the time. Noticed this has happened to others but no solutions are posted.

Edited by G70
Link to comment
Share on other sites

  • Replies 4
  • Created
  • Last Reply

Top Posters In This Topic

  • jonesappliancesvc

    3

  • RegUS_PatOff

    2

jonesappliancesvc

Thanks for the data sheet, I already have one. I'm looking for a component level diagram for the dispenser power and selector board. My guess is unplugging the ribbon between the two boards while the refrigerator had power damaged one of the boards...trying to determine which one just like this guy.

http://appliantology.org/topic/35164-frigidaire-gallery-plhs267zab0-wont-stop-dispensing-ice/

Edited by G70
Link to comment
Share on other sites

jonesappliancesvc

Went back out today (3 days later), reassembled boards and all was back to normal. My best guess is eprom on one of the boards reset?? who knows

Thanks

Link to comment
Share on other sites

×
×
  • Create New...