FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Microwave just died...Sunbeam model SGB8901
#1
Posted 17 September 2012 - 09:48 AM
They tested the outlet and that works fine, and they plugged the microwave into another outlet and it still didn't work.
is there a fusible link or on unit fuse that could have blown?
Thanks all...just throwing the on the forums before advising them to throw the microwave away...
model SGB8901
Serial Tab 81106215449
#2
Posted 17 September 2012 - 12:14 PM
remove the top and follow the power cord it might be on a small PC board near the back or on a little fuse block . the fuse is about an inch long and is white with silver end caps that make the connection on each end . fuse is 15 amps
remove and test , most likely it is bad
fuse may blow if the micro switches get out of sync and one hangs up , most of the time you change the blown fuse and it never happens again
#3
Posted 17 September 2012 - 12:22 PM
http://www.radioshac...erValue=Over 4A
#4
Posted 17 September 2012 - 03:40 PM
one of my video productions: “Easter Seals: Walk With Me”
every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962
RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Your Sometimes-Lucid Host:
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."
ApplianceGuru.com | AppliancePartsResource.com | Fixitnow.com














