m#ghw9150pw2 came in shop with bad rear tub bearing(very sloppy) & belt off.never did one of these bearing jobs.two questions,are there any special tools i need to purchase to do the job(so i can figure them in the estimate) & i saw something here about some type of front bearing should be changed out along with the rear.just want to make sure of what i am getting into here.any tips greatly appreciated.
Appliantology Parts Search Box
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
whirlpool duet bad tub bearing
Started by bmmc, Sep 27 2012 03:39 PM
3 replies to this topic
Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
#2
Skiter29
-
- Sublime Master of Appliantology
-
- 315 posts
Kohai
Posted 27 September 2012 - 03:54 PM
The bearing is in the rear end of the tub u will need the rear tub and the inner tub, inner tub usally dosnt come out of the rear very costly and you do not need special tools
- Samurai Appliance Repair Man likes this
#3
Samurai Appliance Repair Man
-
- Fermented Grand Master
-
- 24,319 posts
Your Sometimes-Lucid Host
- Location: USA
- Flavorite Brew:Kirin Ichiban
Posted 27 September 2012 - 04:15 PM
Rear drum with bearing ==> http://www.repaircli...mber=GHW9150PW2
Inner Tub ==> http://www.repaircli...mber=GHW9150PW2
Inner Tub ==> http://www.repaircli...mber=GHW9150PW2
FAQs | Parts | Memberships | Consultations | Repair Videos | Newsletter | Beer Fund | Contact
#4
Scottthewolf
-
- Academy Fellow
-
- 1,917 posts
Senpai
- Location: USA
- Flavorite Brew:Dunkin Donuts Coffee
Posted 27 September 2012 - 06:09 PM
Whirlpool has plans to come out with a whole outer tub and the inner wash basket complete with the counterweights, the bearing and seal, and the shaft assembly because technicians have complained that disassembly and reassembly takes too long and that having to order the separate parts rather than a whole assembly takes up too much space in the van.
- Samurai Appliance Repair Man likes this
Scott Wolf
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
Your Sometimes-Lucid Host:
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."
ApplianceGuru.com | AppliancePartsResource.com | Fixitnow.com
