Jump to content


Use this Search Box to Find Appliance Repair Help Now
Need help finding your model number?
365-day return policy on all parts purchased here, even electrical parts that have been installed!


FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


Welcome to Appliantology.org, the Web's Premiere Appliance Repair Resource for DIYers!

The world-famous Samurai Appliance Repair Forums


You can post a question and get repair help for FREE! Click here to get started.


Already a member of the Appliantology Academy? Just sign in with your username and password in the upper right-hand corner of the screen.

 


Photo

DWSR483EB0WW Need Manual For Re-assembly!


  • Please log in to reply
37 replies to this topic

#21 richseattle56

richseattle56

    Kohai

  • Chief Appliantologist
  • PipPipPip
  • 378 posts
  • Location: USA
  • Flavorite Brew:Coors Light or Vodka

Posted 30 September 2012 - 02:17 PM

have no red.
Other than no red the above what was last posted is correct.
No notes or picks of previous motor wiring but the tech sheet I posted shows the original.

Edited by richseattle56, 30 September 2012 - 02:25 PM.


Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

#22 RegUS_PatOff

RegUS_PatOff

    Sensei

  • Academy Instructor
  • PipPipPipPipPip
  • 33,588 posts
  • Location: USA
  • Flavorite Brew:Chief NTSC Black & White

Posted 30 September 2012 - 05:56 PM

have no red.

I see some Red wires in the pictrure of your Motor you posted ..
Your wiring diagrams shows Red
There should be (5) connections to the Motor ...
What color wires are they ?
.

one of my video productions: “Easter Seals: Walk With Me”

every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962

RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw

#23 richseattle56

richseattle56

    Kohai

  • Chief Appliantologist
  • PipPipPip
  • 378 posts
  • Location: USA
  • Flavorite Brew:Coors Light or Vodka

Posted 01 October 2012 - 09:47 AM

pink to idler arm switch
yellow to door switch
purple to element and cycling thermo
brown to hi-limit thermo
black to terminal block/ (a red wire with a black stripecomes off the black wire connector goes to I think the door light. It goes inside door frame.

Did you look at theTech sheet I posted about how to wire the newer style motor?

Edited by richseattle56, 01 October 2012 - 09:50 AM.


#24 RegUS_PatOff

RegUS_PatOff

    Sensei

  • Academy Instructor
  • PipPipPipPipPip
  • 33,588 posts
  • Location: USA
  • Flavorite Brew:Chief NTSC Black & White

Posted 01 October 2012 - 12:59 PM

(earlier, you said Yellow goes to ground)
you're missing wire (Red ?) to Start Switch
.

one of my video productions: “Easter Seals: Walk With Me”

every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962

RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw

#25 richseattle56

richseattle56

    Kohai

  • Chief Appliantologist
  • PipPipPip
  • 378 posts
  • Location: USA
  • Flavorite Brew:Coors Light or Vodka

Posted 01 October 2012 - 01:18 PM

White goes to ground

Edited by richseattle56, 01 October 2012 - 02:31 PM.


#26 RegUS_PatOff

RegUS_PatOff

    Sensei

  • Academy Instructor
  • PipPipPipPipPip
  • 33,588 posts
  • Location: USA
  • Flavorite Brew:Chief NTSC Black & White

Posted 01 October 2012 - 01:22 PM

but missing wire (Red ?) to Start Switch


.

one of my video productions: “Easter Seals: Walk With Me”

every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962

RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw

#27 richseattle56

richseattle56

    Kohai

  • Chief Appliantologist
  • PipPipPip
  • 378 posts
  • Location: USA
  • Flavorite Brew:Coors Light or Vodka

Posted 01 October 2012 - 01:25 PM

there is a red wire coming down from control panel and connects to idler switch on the other side of switch it turns to a pink wire

#28 RegUS_PatOff

RegUS_PatOff

    Sensei

  • Academy Instructor
  • PipPipPipPipPip
  • 33,588 posts
  • Location: USA
  • Flavorite Brew:Chief NTSC Black & White

Posted 01 October 2012 - 02:01 PM

White goes to groung

according to your wiring diagram:
White wire and Brown wire should be Neutral
(would be ground with a 3-wire Dryer Cord)
Door Switch wire should be Brown w/ Yellow stripe

red wire coming down from control panel and connects to idler switch on the other side of switch it turns to a pink wire

brown to hi-limit thermo

should be Brown from Timer to Hi-Limit, stays Brown, goes to Idler Switch then turns to Pink
That same Brown also goes to one side of Start Switch, then turns to Red to motor
Brown doesn't go to Motor

Was this Dryer working at all when you got it ?
Had it been re-wired by someone ?
.

one of my video productions: “Easter Seals: Walk With Me”

every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962

RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw

#29 richseattle56

richseattle56

    Kohai

  • Chief Appliantologist
  • PipPipPip
  • 378 posts
  • Location: USA
  • Flavorite Brew:Coors Light or Vodka

Posted 01 October 2012 - 02:11 PM

It was hook up by my customer and it buzzed as soon as you plugged it in. I changed the wiring around and got it to work and not buzz but the dryer came on as soon as you put it on any cycle I have not been able to get it to come on and run. It buzzes when plug in with every configuration I have tried. He got the part from Sears and the instruction sheet that is the PDF posted on previous page did not come with it. I tried to contact Sears support and they say they dont put the instruction sheet in the box (by poilicy) because it is a liability. So could the customer have burnt up the motor? I have used the wiring colors in the top picture of the PDF but motor still buzzes.
I only have no stiped wires that go to motor the only stripped wire i have is the red w/ black stripe that comes off the black wire connector and goes to door assembly.

Edited by richseattle56, 01 October 2012 - 02:24 PM.


#30 RegUS_PatOff

RegUS_PatOff

    Sensei

  • Academy Instructor
  • PipPipPipPipPip
  • 33,588 posts
  • Location: USA
  • Flavorite Brew:Chief NTSC Black & White

Posted 01 October 2012 - 02:36 PM

red w/ black stripe that comes off the black wire connector and goes to door assembly.

Red w/ Black should go to the Door Light

... got it to work and not buzz but the dryer came on as soon as you put it on any cycle

Start Switch wiring problem ?
OR bad Start Switch ?

should be Brown from Timer to Hi-Limit, stays Brown ... that same Brown also goes to one side of Start Switch,
then turns to Red to motor
Brown doesn't go to Motor

What color wires are on the Start Switch ...
I can't help you if it was re-wired ..
you (or someone) would first need to follow the wiring diagram and connect everything as original
.

one of my video productions: “Easter Seals: Walk With Me”

every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962

RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw

#31 richseattle56

richseattle56

    Kohai

  • Chief Appliantologist
  • PipPipPip
  • 378 posts
  • Location: USA
  • Flavorite Brew:Coors Light or Vodka

Posted 01 October 2012 - 02:48 PM

Red and orange on one post, Brown on the other start switch.
Start switch infinte ohms when off, continuity when turned.
The brown does go to start switch not to the high-limit as stated above. the brown that i have to motor is same wire all the way to start switch
All the wire ties are in place and nothing looks like its been rewired

Edited by richseattle56, 01 October 2012 - 02:58 PM.


#32 RegUS_PatOff

RegUS_PatOff

    Sensei

  • Academy Instructor
  • PipPipPipPipPip
  • 33,588 posts
  • Location: USA
  • Flavorite Brew:Chief NTSC Black & White

Posted 01 October 2012 - 02:50 PM

as shown on the wiring diagram:
Red should go to Motor
.

one of my video productions: “Easter Seals: Walk With Me”

every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962

RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw

#33 richseattle56

richseattle56

    Kohai

  • Chief Appliantologist
  • PipPipPip
  • 378 posts
  • Location: USA
  • Flavorite Brew:Coors Light or Vodka

Posted 01 October 2012 - 03:44 PM

Attached File  control panel.jpg   125.82KB   4 downloadsI traced the brown wire back still in all the factory wire ties. It goes to the left of of the start switch to the motor.

Edited by richseattle56, 01 October 2012 - 03:53 PM.


#34 RegUS_PatOff

RegUS_PatOff

    Sensei

  • Academy Instructor
  • PipPipPipPipPip
  • 33,588 posts
  • Location: USA
  • Flavorite Brew:Chief NTSC Black & White

Posted 01 October 2012 - 04:00 PM

well, then that's not the correct wiring diagram, or I don't know what else to tell you ...
.

one of my video productions: “Easter Seals: Walk With Me”

every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962

RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw

#35 richseattle56

richseattle56

    Kohai

  • Chief Appliantologist
  • PipPipPip
  • 378 posts
  • Location: USA
  • Flavorite Brew:Coors Light or Vodka

Posted 01 October 2012 - 04:00 PM

The red wire from the start switch goes to the signal switch and to the to the idler arm switch. The brown wire goes to the motor and the High limit thermo.Attached File  start switch.jpg   98.94KB   2 downloads

#36 RegUS_PatOff

RegUS_PatOff

    Sensei

  • Academy Instructor
  • PipPipPipPipPip
  • 33,588 posts
  • Location: USA
  • Flavorite Brew:Chief NTSC Black & White

Posted 01 October 2012 - 04:01 PM

well, then that's not the correct wiring diagram, or I don't know what else to tell you ...


.

one of my video productions: “Easter Seals: Walk With Me”

every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962

RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw

#37 richseattle56

richseattle56

    Kohai

  • Chief Appliantologist
  • PipPipPip
  • 378 posts
  • Location: USA
  • Flavorite Brew:Coors Light or Vodka

Posted 01 October 2012 - 04:02 PM

The wiring diagram does not show a signal switch

#38 RegUS_PatOff

RegUS_PatOff

    Sensei

  • Academy Instructor
  • PipPipPipPipPip
  • 33,588 posts
  • Location: USA
  • Flavorite Brew:Chief NTSC Black & White

Posted 01 October 2012 - 04:21 PM

The wiring diagram does not show a signal switch

yes, it's the EOC Signal
(End of Cycle)

don't connect the Black and Purple (Heater) wires, yet

if looking at page 2
. .1 . . . . 3 . . . . 5 . . . . . 7 . . 8
Purple . . Black . . Pink . . . . Yel . Brown

if looking at page 3
. 5 . . 4 . . . . 6 . . . . 1 . . . . 2
Brown . Yel . . . Pink . . Black . Purple

.

one of my video productions: “Easter Seals: Walk With Me”

every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962

RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users


FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

Your Sometimes-Lucid Host:
Samurai Appliance Repair Man
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."

The Appliance Guru | AppliancePartsResource.com | Samurai's Blog

Real Time Analytics