Jump to content


Use this Search Box to Find Appliance Repair Help Now
Need help finding your model number?
365-day return policy on all parts purchased here, even electrical parts that have been installed!


FAQs | Store | Memberships | Repair Videos | Newsletter | Beer Fund | Contact


Welcome to Appliantology.org, the Web's Premiere Appliance Repair Resource for DIYers!

The world-famous Samurai Appliance Repair Forums


You can post a question and get repair help for FREE! Click here to get started.


Already a member of the Appliantology Academy? Just sign in with your username and password in the upper right-hand corner of the screen.

 


Photo

Whirlpool dishwasher mod# DU1010XTXQ2 occaisionally goes into cancel drain.


  • Please log in to reply
9 replies to this topic

#1 phydeauxe64

phydeauxe64

    Yamabushi

  • Chief Master Appliantologist
  • PipPip
  • 98 posts
  • Flavorite Brew:"Double D" Turbo Coffee

Posted 28 September 2012 - 02:24 PM

I've been out on this dishwasher twice now,the first time it had no rinse aid in it I filled it up it worked for 3 washes then started doin it again. Could it be the turbidity sensor or WTF? How do I put this thing in service mode?again Thanks to all who can help me on this one.

Edited by phydeauxe64, 01 October 2012 - 11:29 AM.


Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

#2 RegUS_PatOff

RegUS_PatOff

    Sensei

  • Academy Instructor
  • PipPipPipPipPip
  • 33,588 posts
  • Location: USA
  • Flavorite Brew:Chief NTSC Black & White

Posted 28 September 2012 - 03:03 PM

Tech Sheet - W10292953.pdf
link PM'd
.

one of my video productions: “Easter Seals: Walk With Me”

every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962

RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw

#3 phydeauxe64

phydeauxe64

    Yamabushi

  • Chief Master Appliantologist
  • PipPip
  • 98 posts
  • Flavorite Brew:"Double D" Turbo Coffee

Posted 28 September 2012 - 05:25 PM

Ok tried running diagnostic but no codes came up. It only does it on normal wash, the 1 hour wash works ok. When I run it on normal normal wash it runs about 5 mins. then goes into cancel drain and shuts off.

Edited by phydeauxe64, 28 September 2012 - 06:09 PM.


#4 Chat_in_FL

Chat_in_FL

    Sensei

  • Academy Fellow
  • PipPipPipPipPip
  • 1,146 posts
  • Location: USA
  • Flavorite Brew:on the house...

Posted 29 September 2012 - 05:30 AM

Whirlpool Service Pointer W10402734

Customer Concern: After 10 min of operation the DW coes into cancel drain and stops. This issue can be very sporatic. Tech will find a 6-1 error code recorded in service diagnostics.

Correction: The control will have to be replaced with one that has upgraded software designed to handle abnormal power variations.
We, the unwilling, led by the unknowing, are doing the impossible for the ungrateful. We have done so much, for so long, with so little, we are now qualified to do anything with nothing.

Mother Teresa

#5 RegUS_PatOff

RegUS_PatOff

    Sensei

  • Academy Instructor
  • PipPipPipPipPip
  • 33,588 posts
  • Location: USA
  • Flavorite Brew:Chief NTSC Black & White

Posted 29 September 2012 - 09:08 AM

Whirlpool Service Pointer W10402734

ahh, yes ...
W10402734 Final SL English.pdf
Possible Causes:
This issue may be caused by:
• Siphoning through the drain hose
• Severe Sudsing
• Debris in the sump
• Control Board software error may cause a false error code resulting in cycle cancellation.
(This issue is more likely to happen in areas that are susceptible to abnormal power supply variations)
Correction:
If the customer has a cancel drain issue, check the following:
1. Make sure the dishwasher is installed according to installation instructions provided with the unit.
2. Check for water siphoning out through the drain hose.
Insure that the drain hose termination point is above the water level in the tub.
(The drain loop must be attached to the side of the tub and high enough to prevent siphoning.)
3. Check for severe sudsing or a malfunctioning Rinse Aid dispenser.
4. Check for locked rotor in wash pump.
5. Remove any debris in the bottom of the sump/chopper area.
6. Check for water supply and proper water level in the dishwasher.
7. If all the above checks are OK, then the control will need to be replaced with one that has
upgraded software designed to handle abnormal power variations.
See chart for part numbers.
.

one of my video productions: “Easter Seals: Walk With Me”

every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962

RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw

#6 phydeauxe64

phydeauxe64

    Yamabushi

  • Chief Master Appliantologist
  • PipPip
  • 98 posts
  • Flavorite Brew:"Double D" Turbo Coffee

Posted 01 October 2012 - 11:28 AM

Thanks fellas, it was over sudsing I didn't put any soap in it and it was FULL of suds. We rinsed it out with a water hose and test ran it and it worked ok. As for power fluctuation it was in an area well known for that problem. So maybe with us testing it at the shop and rinsing it out really good, I think we might have it fixed. Thanks for all your input on this, if it still has problems now I know what to look for. I knew I could count on Y'all. :-)

#7 RegUS_PatOff

RegUS_PatOff

    Sensei

  • Academy Instructor
  • PipPipPipPipPip
  • 33,588 posts
  • Location: USA
  • Flavorite Brew:Chief NTSC Black & White

Posted 01 October 2012 - 12:49 PM

just a note ...
must use dishwasher detergent
NOT dish soap nor any other soap.
Suds can be removed with using
a cup of vinegar
OR
a cup of vegetable oil
in a wash cycle.
.

one of my video productions: “Easter Seals: Walk With Me”

every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962

RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw

#8 jb8103

jb8103

    Senpai

  • Chief Appliantologist
  • PipPipPipPip
  • 530 posts
  • Location: USA
  • Flavorite Brew:Ginger ale

Posted 01 October 2012 - 01:34 PM

just a note ...
must use dishwasher detergent
NOT dish soap nor any other soap.
Suds can be removed with using
a cup of vinegar
OR
a cup of vegetable oil
in a wash cycle.


Customer question on this: will her dishwasher cleaner take care of leftover detergent? It is goopy in there.
First, do no harm.

#9 RegUS_PatOff

RegUS_PatOff

    Sensei

  • Academy Instructor
  • PipPipPipPipPip
  • 33,588 posts
  • Location: USA
  • Flavorite Brew:Chief NTSC Black & White

Posted 01 October 2012 - 02:39 PM

it should
.

one of my video productions: “Easter Seals: Walk With Me”

every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962

RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw

#10 Scottthewolf

Scottthewolf

    Senpai

  • Academy Fellow
  • PipPipPipPipPip
  • 2,500 posts
  • Location: USA
  • Flavorite Brew:Dunkin Donuts Coffee

Posted 01 October 2012 - 08:33 PM

Too much rinse aid will cause sudsing as well.
Scott Wolf




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users


FAQs | Store | Memberships | Repair Videos | Newsletter | Beer Fund | Contact


Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

Your Sometimes-Lucid Host:
Samurai Appliance Repair Man
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."

The Appliance Guru | AppliancePartsResource.com | Samurai's Blog

Real Time Analytics