Jump to content
LIMITED TIME OFFER: Use code 10YEARS10 to get 10% off your Appliantology membership. Click here for more ×
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 4/27/2024 @10 AM ET
      27 April 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

BOSCH DRYER WTA3510US Not heating

APPLIANCE DEAN

By APPLIANCE DEAN
in DIY Appliance Repair Help

 Share

Recommended Posts

APPLIANCE DEAN Sōhei

APPLIANCE DEAN

Posted
Posted

The heating element in this unit was fried for sure I visually inspected the coils and they were damaged. There was a nail stuck in i causing the damage. I Checked for proper voltage at the heating element and was only getting 120.00. I put in a new control board and the unit now turns on but no heat. The timer counts down but it's not heating. Please help as these Bosch parts are expensive.

Link to comment
Share on other sites
  • Replies 5
  • Created
  • Last Reply

Top Posters In This Topic

  • APPLIANCE DEAN

    3

  • kdog

    2

  • Adirondack Bob

    1

Popular Days

Top Posters In This Topic

Popular Days

kdog Sensei

kdog

Posted
Posted

You have 240 supply? I think those plug into washer and there are some cartridge fuses involved - if I recall they're oddball 16A fuses

Click on Pic:

Fuse-171050-00941554.jpg

Link to comment
Share on other sites
APPLIANCE DEAN Sōhei

APPLIANCE DEAN

Posted
  • Author
Posted

I will check this but I'm pretty sure I was getting 240v past the fuse but I may be off.

Link to comment
Share on other sites
Adirondack Bob Sensei

Adirondack Bob

Posted
Posted

Just a thought. On the Heating Element Assembly (Item #467462-Manufacturer Number 265676) there looks to be a Manual-Reset Thermostat. That may be tripped?

Link to comment
Share on other sites
  • 4 months later...
APPLIANCE DEAN Sōhei

APPLIANCE DEAN

Posted
  • Author
Posted

keyed wire connector on the control board fit in the wrong slot. The heating element was only getting half of the power.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...