Jump to content



Learn appliance repair at the Samurai Tech Academy.  Learn more.  Earn more.


Parts Search
Site Search

FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


Welcome to Appliantology.org, the Web's Premiere Appliance Repair Resource!

The world-famous Samurai Appliance Repair Forums


To get started, click here.


Already a member of the Appliantology Academy? Just sign in with your username and password in the upper right-hand corner of the screen.

 


Photo

Commercial Maytag washer MHN30PDAWW0


  • Please log in to reply
5 replies to this topic

#1 tedank

tedank

    Ikkō-ikki

  • Chief Appliantologist
  • PipPip
  • 22 posts

Posted 04 October 2012 - 01:47 PM

I'm working on a commercial Maytag washer. Here's what's happened so far. The washer stopped with 8 minutes left in the cycle. I got it to clear out, put money in it and it locks the door and stops and doesn't do anything. It showed no codes at first, later an F28 code showed which means the CCU and motor board aren't communicating. I put in a new switch assembly, but nothing has changed. The ground switches were out of position, the motor and harness to it were good, no loose connections. Put money in again and door locks and then nothing. Does anyone know what is wrong? Thanks, Ted

Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

#2 Budget Appliance Repair

Budget Appliance Repair

    Sensei

  • Appliantology Fellow
  • PipPipPipPipPip
  • 4,886 posts

Posted 05 October 2012 - 06:42 AM

If you leave any panels off so that any of the ground switches are not closed you will get an F28 error.

If the switch mounting is broken so that when the panels are installed the switches don't close you will get the same problem of coarse.
William Burk (Willie)
Willie's Budget Appliance Repair
Eureka, CA 95501

#3 tedank

tedank

    Ikkō-ikki

  • Chief Appliantologist
  • PipPip
  • 22 posts

Posted 30 October 2012 - 12:53 PM

I replaced the ground switches, and put the panels back on before trying to start the machine. It still just locks the door and sits. There is no error code. What else can it be? Thanks for your response. Ted

#4 RegUS_PatOff

RegUS_PatOff

    Sensei

  • Academy Instructor
  • PipPipPipPipPip
  • 33,588 posts
  • Location: USA
  • Flavorite Brew:Chief NTSC Black & White

Posted 30 October 2012 - 01:24 PM

... F28 code showed which means the CCU and motor board aren't communicating.

F28 ... may also be a polarity problem.. (Wall Outlet)
Has this Washer worked OK up till now at this location ?

Also, verify the drive motor operation in diagnostic mode.
If drum fails to tumble, replace the MCU

Motor Control Unit
http://www.repaircli...tDetail/2118236

 

picUnavailable175.jpg


.

one of my video productions: “Easter Seals: Walk With Me”

every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962

RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw

#5 Skiter29

Skiter29

    Kohai

  • Sublime Master of Appliantology
  • PipPipPip
  • 356 posts

Posted 01 November 2012 - 10:59 PM

try pulling the M3 wire harness off the ccu and then try it if it starts to fill then its your MCU M3 is located on the side of ccu should have 2 small blue wires

#6 tedank

tedank

    Ikkō-ikki

  • Chief Appliantologist
  • PipPip
  • 22 posts

Posted 02 November 2012 - 01:01 PM

Thanks, I'll try that.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users


FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

Your Sometimes-Lucid Host:
Samurai Appliance Repair Man
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."


The Appliance Guru | Master Samurai Tech

Real Time Analytics