Jump to content


Use this Search Box to Find Appliance Repair Help Now
Need help finding your model number?
365-day return policy on all parts purchased here, even electrical parts that have been installed!


FAQs | Store | Memberships | Repair Videos | Boot Camp | Newsletter | Beer Fund | Contact


Welcome to Appliantology.org, the Web's Premiere Appliance Repair Resource for DIYers!

The world-famous Samurai Appliance Repair Forums


You can post a question and get repair help for FREE! Click here to get started.


Already a member of the Appliantology Academy? Just sign in with your username and password in the upper right-hand corner of the screen.

 


Photo

Oasis washer model # 110.27086601


  • Please log in to reply
4 replies to this topic

#1 repairguy1

repairguy1

    Ikkō-ikki

  • Chief Appliantologist
  • PipPip
  • 58 posts
  • Location: USA
  • Flavorite Brew:Leinenkugel Orange Shandy

Posted 08 October 2012 - 08:04 AM

During the "clean washer" cycle, which is the only cycle not working, the timer runs from 60 mins to 57 mins and then jumps to 2 mins and drains water and shuts off. No error codes displayed or in history.

Tub moves freely. Anyone encounter this or have any thoughts on what may be happening?

Any help appreciated.

Thanks

Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

#2 sh2sh2

sh2sh2

    Senpai

  • Sublime Master of Appliantology
  • PipPipPipPip
  • 577 posts
  • Location: USA
  • Flavorite Brew:yeunling

Posted 08 October 2012 - 04:22 PM

i had this once and this is what i noticed. when the cleaning cycle works properly it fill with some water and then spins the tub to slosh the water around the tub, then it fills to the top and adjatates. On the one that i had that was doing what u described it filled with too much water at first and when it went to spin the tub the basket had already floated up and it spun the impeler. it then went to 2 min, drain the water and shut off. I ordered a main control board but unfoutunetly i did not get the call back so i dont know if it fixed it. Hope it helps

#3 nickfixit

nickfixit

    Sensei

  • Academy Fellow
  • PipPipPipPipPip
  • 2,142 posts
  • Location: USA
  • Flavorite Brew:Glen Livit

Posted 11 October 2012 - 05:28 AM

it's a known problem on some models, only a new main control will fix it.
" Giving numerical data to Sears management is like giving a monkey a machine gun. No one knows for certain what will happen, but you can be sure of two things... It will be real messy, and only the monkey will be unharmed"

#4 Samurai Appliance Repair Man

Samurai Appliance Repair Man

    Shōgun

  • Fermented Grand Master
  • 28,685 posts
  • Location: USA
  • Flavorite Brew:Sapporo Original Draft Rice Lager

Posted 11 October 2012 - 05:45 AM

Part link to the main control board ==> http://www.repaircli...0189966/1469076

And how to replace it:



#5 repairguy1

repairguy1

    Ikkō-ikki

  • Chief Appliantologist
  • PipPip
  • 58 posts
  • Location: USA
  • Flavorite Brew:Leinenkugel Orange Shandy

Posted 16 October 2012 - 07:07 AM

  • thanks for all the help





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users


FAQs | Store | Memberships | Repair Videos | Boot Camp | Newsletter | Beer Fund | Contact


Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

Your Sometimes-Lucid Host:
Samurai Appliance Repair Man
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."

The Appliance Guru | AppliancePartsResource.com | Samurai's Blog

Real Time Analytics