During the "clean washer" cycle, which is the only cycle not working, the timer runs from 60 mins to 57 mins and then jumps to 2 mins and drains water and shuts off. No error codes displayed or in history.
Tub moves freely. Anyone encounter this or have any thoughts on what may be happening?
Any help appreciated.
Thanks
Appliantology Parts Search Box
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Oasis washer model # 110.27086601
Started by repairguy1, Oct 08 2012 08:04 AM
4 replies to this topic
#1
repairguy1
-
- Chief Appliantologist
-
- 41 posts
Ikkō-ikki
- Flavorite Brew:Blue Moon
Posted 08 October 2012 - 08:04 AM
Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
#2
sh2sh2
-
- Sublime Master of Appliantology
-
- 213 posts
Sōhei
- Location: USA
- Flavorite Brew:yeunling
Posted 08 October 2012 - 04:22 PM
i had this once and this is what i noticed. when the cleaning cycle works properly it fill with some water and then spins the tub to slosh the water around the tub, then it fills to the top and adjatates. On the one that i had that was doing what u described it filled with too much water at first and when it went to spin the tub the basket had already floated up and it spun the impeler. it then went to 2 min, drain the water and shut off. I ordered a main control board but unfoutunetly i did not get the call back so i dont know if it fixed it. Hope it helps
- Samurai Appliance Repair Man likes this
#3
nickfixit
-
- Academy Fellow
-
- 1,965 posts
Sensei
Posted 11 October 2012 - 05:28 AM
it's a known problem on some models, only a new main control will fix it.
- Samurai Appliance Repair Man likes this
" Giving numerical data to Sears management is like giving a monkey a machine gun. No one knows for certain what will happen, but you can be sure of two things... It will be real messy, and only the monkey will be unharmed"
#4
Samurai Appliance Repair Man
-
- Fermented Grand Master
-
- 24,334 posts
Your Sometimes-Lucid Host
- Location: USA
- Flavorite Brew:Kirin Ichiban
Posted 11 October 2012 - 05:45 AM
Part link to the main control board ==> http://www.repaircli...0189966/1469076
And how to replace it:
And how to replace it:
- kdog likes this
FAQs | Parts | Memberships | Consultations | Repair Videos | Newsletter | Beer Fund | Contact
#5
repairguy1
-
- Chief Appliantologist
-
- 41 posts
Ikkō-ikki
- Flavorite Brew:Blue Moon
Posted 16 October 2012 - 07:07 AM
- thanks for all the help
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
Your Sometimes-Lucid Host:
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."
ApplianceGuru.com | AppliancePartsResource.com | Fixitnow.com
