Jump to content



Learn appliance repair at the Samurai Tech Academy.  Learn more.  Earn more.


Parts Search
Site Search

FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


Welcome to Appliantology.org, the Web's Premiere Appliance Repair Resource!

The world-famous Samurai Appliance Repair Forums


To get started, click here.


Already a member of the Appliantology Academy? Just sign in with your username and password in the upper right-hand corner of the screen.

 


Photo

110.46462501 duet sport no spin intermittant


  • Please log in to reply
4 replies to this topic

#1 telefunkenu47

telefunkenu47

    Kohai

  • Sublime Master of Appliantology
  • PipPipPip
  • 405 posts
  • Location: USA

Posted 09 October 2012 - 03:38 PM

Hi guys/ I have a duet sport, customers actually, went on a no spin complaint. pulled an f01 code, replaced the ccu as directed. week later, same thing. not throwing codes, walks through diagnostics intermittantly. is there something I'm missing? checked all the usual suspects, pump was recently replaced. Any insight here? I ordered a new mcu but not sure if it will fix. seems a little quirky ramping up in diagnostic mode, sometimes spins sometimes not. cust can get it to spin out after repeated attempts. Any suggestions greatly appreciated. Thanks !
Even root canal is easy...if you're a dentist...

Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

#2 jumptrout

jumptrout

    Sensei

  • Appliantology Fellow
  • PipPipPipPipPip
  • 1,380 posts
  • Location: USA
  • Flavorite Brew:Coors Light

Posted 09 October 2012 - 05:37 PM

I would verify the signal from the door switch.

#3 telefunkenu47

telefunkenu47

    Kohai

  • Sublime Master of Appliantology
  • PipPipPip
  • 405 posts
  • Location: USA

Posted 09 October 2012 - 10:59 PM

have you seen this on the sport?
Even root canal is easy...if you're a dentist...

#4 telefunkenu47

telefunkenu47

    Kohai

  • Sublime Master of Appliantology
  • PipPipPip
  • 405 posts
  • Location: USA

Posted 10 October 2012 - 07:49 PM

could the pressure switch be causing the unit to go out on suds? since this washer has no display, there wouldnt be a failure code would there? how would one go about verifying that this is happening?
Even root canal is easy...if you're a dentist...

#5 Samurai Appliance Repair Man

Samurai Appliance Repair Man

    Shōgun

  • Master Samurai Tech
  • 29,648 posts
  • Location: USA
  • Flavorite Brew:Sapporo Original Draft Rice Lager

Posted 10 October 2012 - 07:56 PM

A slow drain or clogged/flakey pump will cause this error, too.

If you're sure the pump and drain check out good, then replace the CCU ==> http://www.repaircli...er=110.46462501

Posted Image

HINT: In situations like this where an analytical solution is elusive due to shitty information from the manufacturer, I always buy the expensive control board from RepairClinic so I can return it in case I'm wrong.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users


FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

Your Sometimes-Lucid Host:
Samurai Appliance Repair Man
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."


The Appliance Guru | Master Samurai Tech

Real Time Analytics