Need appliance parts? Call 877-803-7957 now or use the parts search box:

Parts Search

Learn appliance repair at online the Master Samurai Tech Academy.  Learn more.  Earn more.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

  • Announcements

    • Samurai Appliance Repair Man

      ***READ THIS PRIOR TO STARTING A NEW TOPIC***   05/02/2016

      Topics with the complete and accurate model number in the topic title will get priority attention. You can validate your model number by entering into the form on this page: http://www.repairclinic.com/?clearLs=true For more help on using Appliantology effectively, please see this page:  
clman_old

Variable Speed GE Profile High Suction Pressure

3 posts in this topic

Late last minute call out of area to a ncoo GE Profile. It had previously been serviced approx 30 days ago for ncoo. Owner and extended warranty co both told me that the previous servicer said unit had a sealed system leak. I found a access valve installed, ff @ 74 deg and fz @ 79. Variable speed compressor running and cool, no heat in liquid line and a slightly cool suction line. Initial low side pressure @ -4 psi. Looked for signs of leak before and after charging - nothing found. Charged unit so customer could use the unit till a resolution was achieved. The problem comes in with two things. I charged the unit to approx 3psi - No temp changes to anything. Kept going up to 5 then 10 then 15, etc till I finally got some heat in the condenser about 1/3 of the way through at 35psi. Also the compressor had a sort of dull light rod knock sound - lighter when settled and a bit more pronounced when adding refrigerant. The temp started dropping quickly then but I know somethings wrong here. I've never charged a residential unit to that high of a low side pressure before. I find it odd that the unit would have a leak and a bad compressor but I know it's possible. Just not used to charging variable speed units so it leaves me with questions that with a recip comp I would not have. Wish I would have had time to add a high side valve.

I don't know if I'll be going back to this one as the ext warr co will most likely do a buyout. I did offer to purchase it for parts should they do so so I could experiment with it. I guess moreover I am looking for more information for future troubleshooting as well as with this issue in particular. With a reciprocating compressor one would expect pressures to be a in certain parameters depending on environmental conditions. Knowing those parameters and comparing them to what is happening allows you to determine performance and faults. Certainly variable speed / liner compressors / systems should have their own set of expected behaviours and pressures which would allow you to do the same as with the recrip ones. I can't find any info on the web and nor can I find good tech data on LG's tech site.

Opinions please. Thanks

Share this post


Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

GE or LG ?

Does this Fridge have a model number ?

Share this post


Link to post
Share on other sites

What is "ncoo" ?

does this system use a capillary tube or expansion valve to control refrigerant flow ?

does this system use a head pressure control of some other control to regulate high and or low pressure ?

Share this post


Link to post
Share on other sites