Jump to content
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Kitchenaide Double Oven Range KDRP487MSS02 Manual needed


tpoindexter

Recommended Posts

I have a double oven, range that both the ovens are not reaching temperature. It has nine gas burners on top, and, the ovens are electric elements. Elements are getting 220 volts. Any thoughts on what the problem may be? I need the service manual before I tear into this one.

Link to comment
Share on other sites

  • Replies 5
  • Created
  • Last Reply

Top Posters In This Topic

  • tpoindexter

    4

  • RegUS_PatOff

    2

.... Elements are getting 220 volts. Any thoughts on what the problem may be? I need the service manual before I tear into this one.

If the Elements are getting 220v, they'd be getting hot, unless they're bad.

How are you measuring 220v ?

Tech Sheet - 8302546.pdf

link PM'd

Link to comment
Share on other sites

Sorry, I misspoke. I checked the power at the outlet and got 220 volts. Since I'm unfamiliar with the unit I wanted the service manual before I tore into it.

Link to comment
Share on other sites

either a problem with the Thermal Fuses on the back wall of both Ovens

(self-clean used lately ?) :nono:

click on picture

Thermal-Fuse-9759242-00757521.jpg

OR

a problem with (red) L2 line power

Link to comment
Share on other sites

It confused me because it was both ovens. When I get it out and apart I will check out the red wire. Thank You!

Link to comment
Share on other sites

  • 4 months later...

Thank you RegUs.

The fuses fixed this back in October. Just thought I'd update before making my next post.

Link to comment
Share on other sites

×
×
  • Create New...