Posted 25 October 2012 - 12:54 PM
Posted 25 October 2012 - 04:12 PM
We, the unwilling, led by the unknowing, are doing the impossible for the ungrateful. We have done so much, for so long, with so little, we are now qualified to do anything with nothing.
The views and opinions expressed in this post are those of the author and do not necessarily reflect or represent the views and opinions held by my employer. All data and information provided is for informational purposes only.
Posted 25 October 2012 - 04:35 PM
Posted 25 October 2012 - 05:54 PM
If the "leak" from the vent is more than just a few droplets of water---the BLOWER HOUSING (AKA: Casing Assy)---should be replaced (MJZ61841503).
If the SERIAL NUMBER falls within-----> 712xxx to 812xxx...
The DUCT should be replaced to prevent *droplets* of water from leaking onto the floor (especially wood floors).
The re-designed DUCT has a ninety-degree turn at the outlet to "capture" moisture that can fall from the BLOWER HOUSING.
L-O-N-G cycle times
Suds error message
Slow spin speeds
Intermittent water leaks (from rear of washer)
And other annoying symptoms which vary brand-to brand.
The *correct* amount of HE (High Efficiency) detergent that should be used in any front load or agitatorless top load washer with tub sizes 3.0 cu ft and larger is as follows:
HE: (2) Tablespoons Per Wash Load
HE 2X: (1) Tablespoon
HE 3X: (1) Teaspoon
Perform a TUB CLEAN CYCLE every (4) months.
Use: "Tide Washing Machine Cleaner"
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users