samsung dishwasher dmt300rfw/xaa
Posted 29 October 2012 - 06:59 AM
(2) then the heavy and quick light began flashing....(over level water error)
Could this error be due to an obstruction in the food chopper area or in the drain line? Causing a slow drain which in turn may leave too much water in the machine for the computer to advance through the cycle?
Any thoughts greatly appreciated
Oh yes customer added that this unit is about 3 weeks old and that it worked flawlessly for the first two weeks.
Posted 29 October 2012 - 07:10 AM
When it starts the Drain Cycle, does the water actually drain OK (completely) ?
Need parts? Call our Parts Department now! 877-803-7957
Posted 29 October 2012 - 11:48 AM
I was on a warranty call for Assurant Solutions, so i only wanted to do the minimum required ,as they do not pay for xtra labor above and beyond their diagnostics.This was my first service call for them and i was trying to feel them out to see if they were trying to be fair with their servicers or not.They pay the same for 1 trip out or for 4.(Calls are based on triage)Their theory is that 75-80% of calls only require 1 trip so in the long run the servicer comes out ahead,this has not been my experiance.So i told the customer I would get the dishwasher fixed for them even if Samsung and Assurant didnt pay.But on my next trip i would like to be well prepared.
Posted 30 October 2012 - 05:44 PM
Posted 31 October 2012 - 04:53 AM
Classic symptom of Gookus in the Sensor level assy and/or the sensor hose...
Edited by Chat_in_RI, 31 October 2012 - 04:54 AM.
We, the unwilling, led by the unknowing, are doing the impossible for the ungrateful. We have done so much, for so long, with so little, we are now qualified to do anything with nothing.
The views and opinions expressed in this post are those of the author and do not necessarily reflect or represent the views and opinions held by my employer. All data and information provided is for informational purposes only.
Posted 13 December 2012 - 10:10 AM
Do not know how many techs. carry this part on their service vehicles, ( I don't ). So this is a two trip minimum service call............Finish the service call in 1 trip ?????? .............I work on all brands...I would need a 27 foot trailer to work for this company.. .........................P.S. Who pays/ purchases the part??? I had one warranty place call, They said they will pay $ 125 and they will provide the part.........No way , Jose'......Part mark-up part of the business.....
Posted 13 December 2012 - 11:02 PM
N.E.W. is famous for supplying their own parts. They are ridiculously cheap when it comes to purchasing parts. I went on a call on a Whirlpool electric range, it needed an infinite switch. I asked for the OEM Whirlpool switch because the wiring was a quick disconnect, rather than wire for wire, they sent me a Robertshaw universal infinite switch. I was PISSED because now I had to take the wires out of the quick disconnect and reroute the wires because the terminals were not in the same locations! So first they only pay for 1 service call, and NOW you are going to waste my time because now I have to retrofit the part because you are cheap? I DON'T THINK SO!
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users