Posted 10 November 2012 - 11:54 AM
Posted 10 November 2012 - 04:43 PM
Disassemble the burner heads on the affected side and clean off all the parts with emery cloth. Re-assemble and try it again.
- kdog likes this
Posted 10 November 2012 - 05:21 PM
Posted 11 November 2012 - 06:42 AM
Did you make sure you got all the ignitor and switch wires back to the correct positions on the module.
If you swapped two or more of the ignitor output wires then you will get this problem.
- Samurai Appliance Repair Man and skintdigit like this
Willie's Budget Appliance Repair
Eureka, CA 95501
Posted 11 November 2012 - 07:22 AM
Has any House wiring been changed ?
Have you ever checked the polarity of the Wall Outlet (L1, L2, & ground) ?
- Samurai Appliance Repair Man and kdog like this
Need parts? Call our Parts Department now! 877-803-7957
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users