Jump to content



Learn appliance repair at the Samurai Tech Academy.  Learn more.  Earn more.


Parts Search
Site Search

FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


Welcome to Appliantology.org, the Web's Premiere Appliance Repair Resource!

The world-famous Samurai Appliance Repair Forums


To get started, click here.


Already a member of the Appliantology Academy? Just sign in with your username and password in the upper right-hand corner of the screen.

 


Photo

fisher paykel dishwasher mod dd605

stops in cycle

  • Please log in to reply
5 replies to this topic

#1 serv.man

serv.man

    Ikkō-ikki

  • Chief Appliantologist
  • PipPip
  • 33 posts
  • Flavorite Brew:martini

Posted 12 November 2012 - 10:11 AM

When in normal cycle unit runs until it to 27 minutes then everything stops except a huming noise i asume the motor is still runing but timer does not advance in top drawer. So the customer used bottom drawer in eco cycle but now both drawers are doing the same thing. would appreciate any help. Not much experiance with drawer system.

Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

#2 Samurai Appliance Repair Man

Samurai Appliance Repair Man

    Shōgun

  • Master Samurai Tech
  • 29,841 posts
  • Location: USA
  • Flavorite Brew:Sapporo Original Draft Rice Lager

Posted 12 November 2012 - 03:34 PM

Put the unit into diagnostic mode and check all the unit operations: fill, drain, heater, etc. I've PMed you the tech sheet that contains the information to enable you to do these tests.

#3 kdog

kdog

    RoughShod

  • Appliantology Fellow
  • PipPipPipPipPip
  • 7,465 posts
  • Location: Canada
  • Flavorite Brew:Dickens Cider

Posted 12 November 2012 - 11:12 PM

From the deep, dark depths of the Potluck Supper: http://appliantology...05-dishdrawers/
Help us keep the lights on: buy appliance parts here ==> http://repairclinic.com

For service manuals and lots of other goodies, become an Apprentice ==> Apprenticeship

#4 J5

J5

    Senpai

  • Sublime Master of Appliantology
  • PipPipPipPip
  • 528 posts
  • Location: non-US or Canada

Posted 12 November 2012 - 11:54 PM

if its still washing but the clock stops then its likely not heating

if you wait i think 4 hours then you would see F4 fault which says not heating

during production of 605's there was some issues with heater plates

#5 Scottthewolf

Scottthewolf

    Senpai

  • Appliantology Fellow
  • PipPipPipPipPip
  • 2,875 posts
  • Location: USA
  • Flavorite Brew:Dunkin Donuts Coffee

Posted 12 November 2012 - 11:55 PM

Please move this to the kitchen appliances forum. Thanks!
Scott Wolf

#6 kdog

kdog

    RoughShod

  • Appliantology Fellow
  • PipPipPipPipPip
  • 7,465 posts
  • Location: Canada
  • Flavorite Brew:Dickens Cider

Posted 12 November 2012 - 11:56 PM

Please move this to the kitchen appliances forum. Thanks!


:thumbsup: Duh
Help us keep the lights on: buy appliance parts here ==> http://repairclinic.com

For service manuals and lots of other goodies, become an Apprentice ==> Apprenticeship





Also tagged with one or more of these keywords: stops in cycle

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users


FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

Your Sometimes-Lucid Host:
Samurai Appliance Repair Man
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."


The Appliance Guru | Master Samurai Tech

Real Time Analytics