Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

LG Dryer Mod.# DLGX8001W


jumptrout

Recommended Posts

I need the manual or dis-assembly instructions for this Gas dryer. I have to do a NG to LP conversion. Thank you.

Link to comment
Share on other sites

P.S. I know how to do the LP conversion.

Does anyone know how to remove the front mounted control panel and the steam tray so that the front bulkhead can be removed?

Link to comment
Share on other sites

That is the one.

Thank you Master.

Just as I suspected. Hidden screws.

Edited by jumptrout
  • Like 1
Link to comment
Share on other sites

Well this service call is not going well at all.

Open the dryer door to remove the 4 screws in the front panel.

Bottom 2 screws come right out.

The 2 on the top are still in the top of the opening.

They will not budge.

I finally tried a impact tool and hammer to jolt them loose.

No dice.

Finally told the customer to exchange the dryer at Sears for one that the screws will turn.

My whole week has been wrought with crap like this.

Edited by jumptrout
Link to comment
Share on other sites

  • Team Samurai

$5 off the 750ml bottles in NH State buttlicker stores thru the end of the month...

grey%20goose%20vodka.jpg

  • Like 2
Link to comment
Share on other sites

Thank you for feeling my pain.

Hello, jumptrout, my pain-filled friend. Please share a hit of the hooka with me. Allah has blessed us with an abundant poppy crop and an entire regiment of your Ameedican army to help us harvest it...

hookah.jpg

  • Like 3
Link to comment
Share on other sites

×
×
  • Create New...