100lb Propane Tank Installation
Posted 16 November 2012 - 03:16 PM
Want to do the install myself. I fix appliances all day long, but this is a little different from what I am used to, so any advice would be appreciated.
All you can do is all you can do, but all you can do is enough!!
http://flippingappliances.com/ ~ Helping others to get started for FREE ~ Buying, Selling & Appliance Repair since 1997
Learn how you can become an Appliance Tech http://www.mastersam...iliate.php?id=9 or enter this coupon code for a 10% discount ~ STA_REFERRAL-A:9
Posted 19 December 2012 - 01:27 AM
You can pick up a REGO book at your local heating supply hse. Refer to nfpa 54, also, look at the mfrs instructions, there is a wealth of info there usually. Be advised that the average demand wall heater of 130kbtu needs a 3/4 in supply. Why not pay a few sheckels and have a pro help you out. Go modern, Go gas, Go boom!!!!!Surely you have a buddy or two down at the gas company.
- kdog likes this
Posted 19 December 2012 - 11:51 AM
make sure your insured for propane
as a contractor i no longer work on propane appliances , the insurance rider for propane was way to much money , so i dropped it
at home , make sure your homeowners insurance knows you are using propane for heat , portable heaters are ok , but attached heaters like a wall heater your insurance carrier needs to know about
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users